Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz..Features Switchable boost/cut ranges of ¡À6 or ¡À15 dB Electronically balanced/unbalanced inputs Servo balanced/unbalanced inputs RF filtered inputs and outputs XLR, Barrier Strip, and 1/4" TRS connectors -12dB/+12dB input gain range 18dB/octave 40Hz Bessel low-cut filter Chassis/signal ground lift capability Internal power supply transformer Power-off hardwire relay bypass with 2-second power-up delaySpecifications Input Connectors 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip Input Type Electronically balanced/unbalanced, RF filtered Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm Max Input >+21dBu balanced or unbalanced CMRR >40dB, typically >55dB at 1kHz Output Connectors 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip Output Type Impedance-balanced/unbalanced, RF filtered Output Impedance Balanced 200 ohm, unbalanced 100 ohm Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) Bandwidth 20Hz to 20kHz, +0.5/-1dB Frequency Response 50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range Dynamic Range 109dB; 115dB Signal to Noise Ratio 90dB, 97dB THD+Noise Interchannel Crosstalk Bypass Switch Bypasses the graphic equalizer section in the signal path Low cut Switch (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter Range Switch (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range I/O Meter 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu Indicators EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red) Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz Power Consumption 24W Power Connector IEC receptacle Dimensio
Trustpilot
1 week ago
1 month ago
