MOOG ES3366T Steering Tie Rod End for Ford F-150

Just buy the Moog parts, stay away from local auto parts store parts unless its an emergency. I have bought the cheap garbage from local auto parts store in the past. Its great that the auto parts store parts usual has a lifetime guarantee, but what the point if it fails in a year and they give you a free part which means you have to either spend your time replacing it yourself or pay a mechanic because they typically will not pay for labor or the front end alignment you have to do after replacing some steering/suspension parts. Just buy the Moog part and get better quality and durability.

fits correctly the first time, no need to send back and wait. install is simple, just measure your toe in and after replacing, reset to the same measurements.

These are nice, beefy tie rod ends. With a little time using a proper sized reamer, these are now bing used on my 2017 Polaris RzR Turbo. Plenty of beef for 35’s!

I saved so much money buying these and doing it myself. The dealer quoted me over $2000 to do all my tie rod ends, ball joints, and idler arm. This was a 2001 F-150 that I purchased for about $3800 with < 90k miles. So... the truck was in good condition but had been sitting around for about a year and a half. I thought I was getting something reasonable and affordable but when I saw that quote from the Ford dealer I was so upset. Especially after just replacing all the mufflers from having rusted out. I spent about $400 on Amazon and spent about 6 hours doing it. It was honestly pretty tough but you can rent the proper tools to make it easier. If anyone wants to know more about doing it, be sure to check out YouTube... It helped me a ton. I have used Moog on my whole front end now and have put about 10k on it with no issues yet.

Great part at a good price.However I got it shipped with another Moog tie rod (different #) and the original Moog part number label on both were covered with a white blank label. Therefore I could not identify the parts from each other or even know if they were the right parts. Called Amazon rep and they knew nothing about white labels or what may have happened. Finally was able with great difficulty to peel off enough of the cover label to see the numbers underneath, and both appeared to be correct.These labels were obviously not meant to be removed. I also calipered the parts and was satisfied they were correct. I believe the parts were restocked and then shipped to me but please, Amazon , leave the original part numbers visible on the box or put a new label on with the correct numbers. Like to know for sure why that was done.

As always, great value for the money. All hardware was included, jam nut, castle nut, cotter pin and zerk! Will easily outlive your vehicle, you won't regret your purchase.

You will have to install the grease fitting and the hole is not threaded. Not much trouble to use the fitting to cut the threads but getting it started can make you say some new words. The ball/head is larger than OEM but the tapper shank is direct fit, this must be a problem they solved (hints problem solver). The larger ball must provide more surface and some other stuff, just remember to pack it with grease after installing it. If you are doing what I did and bought Tie Rod End boots to replace the rubber style with poly then you need to get these and measure first. Energy Suspension part 9.13102R does not fit. Even though they would fit my OEM rods.

Fit and worked as it should. No complaints at all. Only time will tell. Well recommended