Maxmoral1-Pack Dual Fan Mount Rack PCI Slot Bracket for Video Card DIY Support 9cm/12cm Fan Computer Radiator Holder

The bracket worked as intended and I had no issue mounting a 120mm fan to cool down one of my components. Dropped temps by 30c!

If you need to put some fans in your expansion slots in your PC case, this is what you want! I was able to stick a 120mm fan on it, and it fits well and is rock solid. It does require a little more than 2 expansion slots, so be cognizant of that when trying to fit it.

Overall this is a decent bracket, it is very sturdy, but it still turns out a bit wobbly from the weight of the fans being supported by just one slot mount. The issue is just that as this bracket is thick enough for normal 120mm fans it takes up more then one expansion slot, but instead of just making the bracket use 2 slots, they made it take 1.5 slots. They could have made it use 2 slots, both supporting the fans better and making is look better as it would actually fill 2 slots instead of just hanging down half way into one slot. Other then that it functions fine and it is an easy way to add extra cooling to your GPU.I have a EVGA 980 TI that had horrendously noisy fans, so bad in fact that under heavy load it sounded like a jet engine, I think that one of the fans was going bad. I thought that I was going to have to try to zip tie some fans to the GPU, then I found this bracket. I removed the GPU fans and plastic shroud and attached a couple of 120mm Noctua 1700 rpm fans to this bracket, then mounted it below the GPU. Then I used a bit of duct tape from the fan to the GPU to channel the air better, I pan on 3D printing something better looking later. Now my GPU is almost completely silent even at max load and temps are still good. If you want to be able to do a significant overclock on a GPU then you might want to use Noctua 3000 PWM so you have some headroom, the 1700 rpm fans are just barely enough at max in something like furmark, although there should always be more headroom in games. Now the real problem with this setup is that I cannot really use a PWM fan curve on the GPU because I have been unable to find any software that can get the GPU temp and control fans. I may just end up making an adapter so that the fans can be powered and controlled by the GPU then I can just setup a fan curve in Afterbuner. Right now I am just leaving the Noctua fans set at 1700 rpm as I can hardly hear them even with my PC setting just 3 feet away on my desk.

Building a rig for a deep learning cluster and wanted something to help keep the card running as cool as possible. These things are pretty awesome, I bought both the 9/12cm and 12/14cm kits and used the connectors from the 12/14cm along with the connectors from the 9/12cm kit and attached three 120mm Noctua fans. I am using the 9/12cm expansion slot for this. It did come slightly bent, however it screws in fine and seems sturdy so whatever, not a big deal to me.

I used this with a Noctua A12x15mm fan to cool a HBA card in my desktop.Installing it wasn't too bad, but as noted in other reviews, it uses 1.5 slots. This is annoying b/c it effectively takes away a second PCI slot but it doesn't cover the entirety of that space. It would've been better if completely used 2 slots (for additional stability) and to prevent this random gap at the back of my PCI slots.Second, not a fault of this design persay, but my Noctua fan wouldn't stay perfectly level. For Noctua, who's products are perfectly balanced, this meant the fan made terrible whirring noises as the fan blades hit the sides of the fan. I was able to fix this by buying a GPU holder to keep the overall setup level.

It's a fan bracket . It does fit fans and pc slots. Decent material thickness .Useful for mounting under a video card for extra cfm to the cooler .Helps "stir" the air in case dead spots . Highly useful in a vertical slot for cooling the video card . Now listen if you put a weak fan IE silent fan in this bracket and it doesn't cool your thermo-nuclear reactor aka some video cards, don't blame the bracket . Use decent cfm fans with decent case cooling and this works well.Don't forget to replace your stock thermal grease , most are dried out from the factory .

Keeps graphics card extra cool

I used this to mount 2 Corsair LL RGB 120mm and it works perfectly, i however cannot seem to get the pci slot cover to go back in underneath it because this bracket is too big. This is no issue for me, but it might be for others and gives better airflow to the fans from the back anyway.

They do what they are supposed to.

Esta bastante bien hecho, es de metal así que es muy resistente. Puedes usar dos ventiladores de la marca que tu quieras siempre y cuando sean de la medida de 9 o 12 cm, algo que no comentan es que es posible solo poner un solo ventilador si así lo deseas. es una excelente solución para agregar ventilación a la tarjeta de video. El único pero es que creo que es un poquito caro tomando en cuenta que tienes que comprar al menos un ventilador para usarlo, pero si te sobran ventiladores o deseas ventilación extra para tu tarjeta definitivamente es un muy buen producto.