Diamond 1.9kw Electric Kitchen Plinth Heater with Room Thermostat & Timer - White Grille

Fitted in my caravan, can only be used on lower power settings on most camp sites but it belts out heat and warms the caravan in minutes! Fitted the control unit near the doir and the heater under the front window. Cables were ok but i extended them to do this.

Easy to fit Great product

Fit's nicely under the kitchen units and seems to be able to deliver heat - as is often the case, our kitchen is the only room in the house without heating! I was concerned about overheating due to lack of airflow in a confined space, but the unit has grill holes on either side that allow it to draw in air nicely. On the high setting it is a bit noisy, around the same level as a kettle boiling, but realistically it's just a big fan heater so that's to be expected. Having the separate control unit is good. We don't use the thermostat but having the on / off at counter height is much better than having to bend down to turn it on and off

Just fitted it in an unheated kitchen. The controller could be a pain, as it's wired to the plug and the heater. It depends on where it's to be fitted as to how much of a problem this is. Fortunately mine was straight forward, a bit of a fiddle but no problem. Works well. Just the job for winter.

I installed today and working fine with to speed

Can't comment on the heater reliability as its early days yet. The Heater Control Unit is extremely difficult to fit and I would understand if a sparky refused to fit this item. (By the way, yes of course you need a fused DP spur unit fitted - read IEE (BS 7671) 18th edition requirements, least of all its a fixed appliance!). You have something like 9 amps flowing when on the max 1900 watt setting, so I assume the multi strand flexible cable is sized at 1.5 mm2. However its terminations will simply not fit into the connectors. You have to cut off the soldering in order to squeeze them in. Hence not fitted to design spec. The connectors are too small and very close together - more like an LED lighting circuit than a 2 kilowatt appliance. This is particularly an issue when you fit multi strand cabling. Also fitment into and out of the single gang back box is too confined. The temperature shown on the programmer was 4 degrees C less than measured room temperature! Best I can do is to ditch the Heater Control Unit and simply have a manual on/off control. If the manufacturer says don't fit a socket plug then don't fit a socket plug. (Its too big a flex cable to squeeze into the plug and its connectors). Interestingly the Control Unit is guaranteed for 1 year, but the heater for 2. Confusing. Buyer (and sparky) beware.

This is a nice unit, works well, seems well constructed and the controller looks good. The only problem I had was with the controller. It works great and looks great, but you really need to take your time and prepare yourself for setting it up. The fact that the labelling on the controller buttons sit to the right (rather than immediately above or below) the many front panel switches, means it’s easy to get confused and press the wrong button. This means starting again and again and again! Equally, a more simple “on/off” time could be devised and a “copy day” feature would help. You need to set up each and every day of the week! So my advice is - Take your time, decide what on off times and temperature setting you want and then slowly and carefully set it up. Good luck!

Perfect plinth heater did not buy a cheap one I want quality

Ordendlich erhalten, Lieferzeit eingehalten, Langzeit Erfahrung noch nicht möglich.

Excellent quality heater, delivery was fast, however item was slightly damaged in transit, not enough to warrant returning it. Other than that I am very happy with this purchase.

Wurde leicht bearbeitet und als Zusatzheizung im Wohnwagen verbaut

Die Betriebsanleitung ist in englischer Sprache verfasst und etwas schwierig beschrieben.