Extech MD10 - Non‑Contact Magnet Detector & Flashlight – Detects AC, DC & Permanent Magnetic Fields with Blue LED Indicator – Pocket‑Sized, Uses 2 AAA Batteries

I've just finished testing this. First off, I think it would be much nicer if there was a status LED to say that it's actually powered up, just because the battery could be dead and it would look the same. Others here are bothered by the momentary switch but that doesn't bother me and I like that it can't be left on. The flashlight, which is pretty good, is also a momentary switch. --- Everything I tested was at 24VDC --- Mine picks up MAC valves well, but doesn't see our SMC valves, like the SMC VQ4101 that we have a lot of here. Ice cube relays read well, but the tool has to be near the end with the coil so there's no dragging it across the top of a bank of relays in a panel. Fortunately it has the little flashlight to be able to look the relays over and identify the coil side. Contactors are a little sloppy, they read but trigger the tool from several inches which could lead to false alerts if several contractors are close together. Overall I think this tool is worth the asking price, not perfect, but it's usefulness is greater than the price so I'm doing 5 stars Edit: accidentally discovered the little cap that pulls off the back side and appears to do nothing has a magnet in it to verify the tool with!

Works as described for industrial solenoid valves. Lost it, buying a replacement.

I bought this to check the electric brakes on my camper. It works great. Pull the breakaway switch and look for the magnetic field on the brake drum. I couldn't be more easy.

This handy little Extech MD10 magnet detector has been working well for verifying electrical operation of solenoid valves, relays and motors. When the test button is depressed, the tip will glow blue when it detects the magnetic field from either permanent magnets or an electrically energized AC or DC coil. It either glows steadily when a strong magnetic field is detected or will flash on and off if the magnetic field is very weak. This detector is about the same size as a regular stick type non-contact voltage detector and is powered by two AAA batteries that are included. There is also a useful LED flashlight that is quite bright for its size located on the opposite end of the tester. The push button for the flashlight must be pressed continuously to keep the light on as it not designed to latch in the on position. The removable cap that covers the LED lens tends to fall off when you handle the tester, so I put a small dab of Saunders UHU Tac removable adhesive putty under it to hold it in place, but still allow it to be removed if necessary. It seems like a decent unit and the price I paid for it here on Amazon was also very reasonable, so overall I'm happy with the purchase.

Good quality

I'm Attracted to gadgets and this is no exception. Ever wonder if that soleniod is actually functioning? Or does that relay actually have a current through it? This will let you know simply by holding it near the relay and holding the button. Great for HVAC or Electrician work. It detects the magnetic field of the device. completely safe as you don't need to touch any connections and it's a quick test.

Seems to work good

Works great to find energized relays but unfortunately it can’t catch 5V relays.

fits in pocket, easy to use. works very well and seems to be decently built. I've been using one in an industrial setting for over a year and the only thing I've had to worry about was my colleagues stealing it for themselves! worth the purchase price.

Fonctionne parfaitement

Good but expensive

Passt

Felsökning i min bil generator och relä