StarlandLed 10-Pack 6.6ft/ 2 Meter U Shape LED Aluminum Channel System with Milky Cover, End Caps and Mounting Clips, Aluminum Profile for LED Strip Light Installations, Very Easy Installation

10 mil. Leds fit perfect, and cover was easy to close.

I've used these in a couple of applications - in kitchens and outside in a pergola. Works well with any strip, but particularly well with high-quality COB lights, where this allows for even light distribution and really professional-looking results.

I toss out the clips and glue the track directly with PU glue on my projects. I love this track and lens combo and keep a bunch in stock for lighting projects. Make sure you remove the clear protective layer off the lens- it is hard to see.

Needed to make some home-made LED grow lights to get a head start on this years gardening. These 1 meter alum channels worked fine to mount 1 meter lengths of LED strips and provide a built-in heat sink to keep the LED strips cool. Placed six channels side-by-side for each light with the included mounting clips, and had a nice and compact strip grow light.

I wished I had used this technique when I put up my lights 2 years ago. The 6' version is a lot easier to work with than the standard 3'. The main reason is it's easier to keep level and in a standard size bedroom you'll make one cut to the second channel for any wall size under 12'. Now I also did not use the clips that came with it. I predrilled 4 holes in my first channel and just used 1&1/4" flathead screws straight into the drywall to the stud on the wall at the ceiling. There is always a continuous stud there, so it doesn't matter where you put your screw holes. The light strip cleanly fits in the channel and over the screws. I wished they could have offered a thicker milk colored cover but it works. You will see each individual led light through the cover but only when they are lit. Overall...easy to install and keep level.

WORKS GREAT

These are a very nice way to install LED strip lighting. I installed on the side of my RV just under the awning and am extremely happy with the result. I drilled holes in the rails (3 each) and screwed them directly to the RV (a dab of silicone at each hole) rather than using the clips, as I wanted a completely flush mounting. The end result is that they are nearly unnoticeable during the day, yet do not cut down the light output at all in use. Note: the frosted lens is a bit tight to snap into place; I made a single swipe on the bottom corners with a medium grit sanding sponge, and it made them easier to snap in. I will definitely be using these for any future LED strip installations.

These look to be made very well there's no defects no issues they are very straight as should be expected. However the hardware is laughable. These are 6 ft strips and they give you two fasteners per. It should come with four and at the very least three. But the bigger issue is the fasteners are not wide enough to secure two lengths together. I suppose they want you to just line them up as close as you can. Instead of giving you a mounting bracket that also holds two ends together. It's quite ridiculous to have such a high quality product and then fail miserably when it comes supplying adequate hardware for installation. Hopefully they fix or address this blunder. If you can find a similar product that has better hardware I'd suggested it, however the extruded aluminum and diffuser are good quality.