Supershieldz (3 Pack) Anti-Glare (Matte) Screen Protector Designed for MacBook Pro 13 inch (2016-2022 / M1, M2)

I would definitely recommend this screen protector for your computer, and I had such a good experience with it, I would buy this brand of screen protector again.Quality: Very good. When you put it on, it definitely has a noticeable matte finish, but it's still easy to see through. The matte finish helps with glare on the screen. The screen protector is thin and fits the computer well.Installation: Fantastic!!! This was the best screen protector installation process I've ever had. The manufacturers were smart in the way they set up installation, and I ended up WITH BASICALLY NO BUBBLES! In my prior experience, there's always at least a few bubbles especially at the corners, but in this case I only have 2 very tiny flaws where a piece of dust got caught under the screen. Otherwise, no other air bubbles. And the installation process was pretty easy, and I got it on correctly the first try!For installation, there are 3 layers1) flimsy peel away plastic to expose the sticky side2) the actual screen protector3) a rigid plastic to use for positioning during installation but is removed after installation to expose the matte finishYou start by peeling away just the corner or top portion of the flimsy plastic layer in order to start sticking the screen protector to the computer. Then using the included squeegee, you slowly squeeze out the air bubbles and work your way down the screen, slowly peeling away more of the flimsy layer, until the screen protector is completed installed. During this process, the rigid plastic makes it easy to hold onto the protector and position it on the screen. After the protector is installed, the rigid plastic is removed. It was easy and effective in removing bubbles.Pro tip--to avoid fingerprints during installation and to keep the sticky side from sticking to your hands, wear thin plastic gloves. It helps a lot.

High-quality matte film. I did everything by intruction and was able to paste it the first time, without a single bubble or speck of dust. The picture quality doesn't spoil much, it's still nice to look at the screen.

Good one, also easy to install

It fits, so I won't be asking too much else from it besides keeping my laptop screen safe from shallow scratches. The installation process does leave something to be desired though.Pros:• Fits the new 2021 - 14" Macbook Pro• Easy to readjust placement on laptop without leaving residue• You get a pack of 3Neutral:• Since it is matte, it does have a slightly grainy texture that you can see and feel.I'm used to using matte protectors, so it doesn't bother me, but if you're someone who wants crystal clear clarity on your screen, then you may be better looking for a tempered glass screen protector.• The anti-glare coating does seem to reduce glare on screen, though maybe at the expense of the screen not being as vibrant or crystal clear as you would with a glass protector. Depends what your preference is.• You will still get smudges from fingerprints which seem unavoidable with any screen protector. It's hardly noticeable with a bright screen, but if you work in dark mode more often, the oil smudges are more noticeable.Cons:• Installation directions on the product packaging are for the phone, which sort of foreshadows how unintuitive the steps will be for laptop installation. While it seems simple- peel off back liner, stick protector to screen, push out bubbles, peel front liner-there is a lot more surface area on a laptop compared to a phone, so there is much more room for error & dust particles.• You can remove the front & back film liners with stickers attached to the corners, but because they are stuck to the corners, you are likely to try placing the protector starting at one of the screen corners. This method ends up with me sticking the protector crookedly since it's hard to know if you lined up the edges properly until you're half-way through. By that point, I had to remove the whole protector and line it up by the top edge (in order to line up with the camera notch). You'd need to be very patient and careful to peel the liners in a specific way/direction to make it work the first time around.• Product does not include a dust-particle remover like other screen protectors I've bought from other brands. A dust-particle remover is just a sticker, so I managed with several pieces of scotch tape to pick up any dust particles I found underneath the screen protector. But if you're unfamiliar with installing screen protectors in general, then the lack of a dust-particle remover would make you go crazy by how sneaky dust can be.The actual product is decent if you just want something to catch any scratches instead of your actual laptop screen. If you want more screen clarity or durability, then probably a glass protector is the way to go.And if possible, install your protector in a largely dust-less room or in a bathroom after a hot shower so that the moisture keeps dust on the floor instead of the air. Or just have a professional install it for you and avoid the headache of spotting those few dust particles somehow making their way under your screen protector.

Been using this for a quarter already, It has been great. It was easy to put on, if you have installed screen protectors on tablets in the past this will be a breeze. I did get a few specs of dust on my installation, but they are not noticeable. The adhesion is great, has not peeled up in any places. The screen resolution has not been affected much, still looks great, have used it for some Lightroom work and has been great. The best part is how it stops the glare, makes my device very usable in rooms with light.Some good to knows:1. This is not a privacy screen, it is a plus if you care about viewing angles which this does not cause issues. So it has great viewing angles.2. For installation! Clean your screen!!! If you have issues after installation where your screen looks blurry you likely has smudges on your screen. Get a good quality screen cleaner and microfiber cloth and get it looking like new. It will make installation easy and give you the best look. The included cleaner is decent, but I recommend a quality cleaner and cloth.Over all great product, and must have for any power user, beats Apple's up-charge for the nano etched screen.

This is a great product. The antiglare effect is awesome. It prevents reflections on the screen.Installation was not as trivial. I installed it on my main Macbook Pro M4 Pro I was able to fit it but used the top of the screen to align it. The result was awesome but for the best, align it from the bottom so that it covers the Notch perfectly