ULTRAPOWER 4-Amp 14.6 Volt LiFePO4 Battery Charger,12.8 Volt LiPO Lithium Battery Charger,Smart Charger Maintainer for Cars,Motocycles,Golf Carts,UAV,Fishing Boat and Deep Cycle Batteries.

I have another charger (NOCO) that works for a variety of automotive batteries including lithium batteries. The lithium iron phosphate battery that I bought is spec'd for 3.5 amp charging current. The other charger I had is current-limited to 2 amps, and it was just taking too long to charge the battery (BOTKU 30 amp-hr battery, also a great battery BTW). So, hoping to shorten the time need to charge the battery, I bought this UltraPower charger. It works exactly as expected, charging at the proper voltage, and even though it still took several hours to charge the battery, the time was reduced by roughly half compared to the other 2 amp charger. I didn't try to measure the charging current, which would have been interesting, but the battery never got warm in the least and I suspect that charging current was never above the spec'd 3.5 amp (spec'd for the battery). If it was ever greater than this, it is very unlikely to have done the battery any harm given that it never got the least bit warm and given that the battery voltage when I put it on the charger is just slightly below 12 V, 11.8 V to be precise. (Evidently, one of the main drawbacks of lithium iron phosphate is that they have to be charged slowly. Rapid charging that would cause the battery to get hot is not allowed.)Bottom line, if you are looking for a charger for this type of battery, and the spec'd charging current is in the range roughly 2 amp to 4 amp, my recommendation is that I have not found any reason to be hesitant to buy and use this charger. From my experience it is perfect for this class of battery so long as the spec'd charging current for the battery is in this range. (The charging current depends on the number of cells connected in parallel and is thus directly tied to the amp-hr rating of the battery.)

works great for my 12 volt lfp batteries. yes things get a little bit warm that's normal. and for those griping that the left set of LEDs don't like that's because they're NOT LEDs. it's just a label that shows the charging states of the real LEDs to the right! 🧐. there's even a card that ships with it now that explains that.

This was fantastic, very handy and sufficient for recharging my phone several times on one charge and for recharging my bike light when it is low. i said was because I lost the darned thing. and now I will buy it again.

I have a bike in a storage unit where there is no access to an AC outlet. I depleted the battery to 50% while fiddling with accessories. I recharged to 100% using this device plugged into a portable power bank with 42000 mAh capacity.It took about an hour, and the power bank had 15% left.The unit did get hot to the touch, but the temperature was steady, and the output was at 13.8V.It serves a purpose for my needs if the bike is not ridden for a while, with portability being the high point.As noted in other reviews, heat is not managed properly by design, and I don't expect this to get heavy use, but it worked fine for my needs, which hopefully will work again if needed.

Compact, simple to use and works exactly as claimed.

***I've only had it for today. If the unit lasts, it is worth every bit of 5 stars and above!***This is by far the best lithium charger I've ever purchased for the money. In less than 4 hours, it has brought back to life both a Shorai & NOCO battery that the OEM chargers were incapable of doing. Granted the package is very compact, but my only suggestion for improvement would be that this "kit" provide true battery/jumper clamps instead of 1 of the 3 other options it comes with.Seriously contemplating purchasing a 2nd unit to be the default chargers for all my LiFePO4 batteries in our household.

I specifically wanted the quick connect option so I can easily maintain a motorcycle battery . This leads me to the only gripe I have there are like four ways to connect and not the one that it should the ring terminals with the 10 Amp fuse to sae now I see a nice little cut in cost without any problems because I'm not sure why it seems we have power connections for a maintainer I would ditch the DC pin plug and the rca video style plug the claw and ring terminals and everything this thing is ment for can be achieved because the connection options are really solid nicer quality wires and plugs honestly so overall there really is nothing to complain about its simple plug and go with nice protection features .Thank youI also like there is not some goofy weird name on this product I'm a little picky on names that look like you just closed your eyes and hit the keyboard when filling out product name box. lolSending positive vibrations to everyone