RapidTac RAPID REMOVER Adhesive Remover for Vinyl Wraps Graphics Decals Stripes 1 Gallon Bottle

I bought this to remove the glue from sun beaten vinyl graphics on my rv. It worked better then anything else I have ever used including many very strong solvents. This really dissolves the adhesive and it doesn't make it gummy. I sprayed directly onto the glue scrapped with a plastic putty knife and wiped off with a towel, if there was any residual I sprayed the rag and it wiped right off. It worked so well I tried it on baked on masking tape and duct tape, worked great. This stuff is incredible and has a pleasant smell. I highly recommend it and I don't usually recommend any products.

I used this product to remove the Diamond Shield from the front of my RV. I started to pull the plastic shield off using a plastic scrapper. Once I had a piece pulled away I used a spray bottle to spray this stuff behind the plastic and onto the adhesive. This stuff reduced the adhesive to a sticky mess that could easily be moved. I found the best way to get the residue off the RV was to soak a paper towel in RapidTac wipe down the surface. I kept turning the paper towel to get a clean surface otherwise you just move the adhesive around.I only used quarter of the bottle and offered the remainder to anyone in our resort. It was gone in minutes and they liked it as much as I did.It is expensive but it is half the price of the stuff offered by others. If I ever have to do this job again this is the stuff I would buy.

Great product!

I used this to remove sticky residue from removed decal lettering on a truck's van-box. It did the job with facility! To rid the surface of the residue, not much of a spray was necessary! The operation was rapid–––circa 1 minute after spraying is sufficient to wipe away the residue. A 2nd operation (spray & wipe) was necessary for the areas of thicker residue. The odor is only mildly unpleasant if at all. I think that it is non-toxic as it's made from citrus.---Richard Stuart Otto

Used this to remove the Diamond Shield from the front of my motorhome. It did a good job of removing the glue and now it looks wonderful. I ordered 2 gal and only used one. TIPs: 1. get the right scrapers (got mine at Harbor freight and there are other retailers that sell them (The plastic scrapers won't scratch your paint)... 2. watch the videos on you tube. they will give you a lot of good advise and show how much effort is needed. This is labor intensive so plan on spending some time doing it. 3. Make sure you give it the 1 to 2 minutes it needs to soften the glue before you scrape it off. Good stuff at the right price.

Removing Diamond Shield from motorhome.

I was removing a protective film from the front of my motorcoach. The film had been on 10 years. Scraping off the plastic film was not an easy task, but removing the remaining adhesive was impossible. So, I thought I'd give RapicTac a try. I'm glad I did. RapidTac Adhesive Remover did the trick. Made this Job a two-day job instead of a two-week job.

My wrap guy apparently did not use 3M, most likely Avery. The rap came off leaving tons of glue. Brake clean you name it didn't want to come off. Was told to use this by another professional, was a little tough yet to still get it all off but considering brake clean and everything else didn't do anything, a+. And it's definitely safer on your paint then other things