Ringke Fusion Compatible with iPhone 6S Case, Clear PC Back & TPU Bumper Drop Protection with Dust Caps for iPhone 6 - Clear

I purchased two of these cases, one is completely clear and the other has the black bumper.The cases have a very good overall feel to them. The buttons on the sides are responsive and the grip is very good.I ordered the clear case to go with my space grey iP6 and I then I ordered the black color, thinking it would look better. Honestly, they both look really attractive on the iP6.The only thing I don't like about these cases is the lack of a substantial lip on the front, in order to protect the screen if you lay it face down. I'm not terribly concerned myself, as I purchased a tempered glass screen protector to keep the screen safe, but you should be aware of this if you aren't using a glass screen protector. What's cool is that Ringke includes a really nice plastic screen protector with this case, and the cut outs line up perfectly for both the earpiece and the camera.You should know that this is not an exceptionally "protective" case, but it should limit cosmetic blemishes to the body of the phone from everyday use. I don't think it will perform well in a drop test so, if you are really clumsy, you might want to look for more substantial protection from UAG, iBlaison, Caseology, or Otterbox.Lastly, there are protective inner and outer films that you have to peel off before using this case with your phone. I found that it is easier to remove the inner layer by peeling it back, starting from the camera cutout on the case. However, the protective film on the back of the case isn't as easy to remove (especially on the clear case because it is harder to see). I had to pull up a corner of the protective film by peeling it back from the lower left corner, just above the raised plastic portion in the corner on the back of the case.I would definitely recommend this case to anyone looking for BASIC protection from scuffs and scratches to their iP6.

I just received this case today and was very surprised. I love the slim feel and look of the iPhone 6 but I dropped my previous phone way too much to trust myself without a case on my new iPhone. I just wanted something to hold me off until I found something more aesthetically pleasing but the very moment I put it on I decided this will do. It feels great in your hand and doesn't add too much bulk or weight. I ordered the clear case and I was worried because sometimes clear cases look cheap but this case looks so nice and simple. Shows off the iPhone design and also seems to be pretty protective. (but no comparison to a super protective phone case like otterbox etc. I just just wanted a slim design) I love the bumpers on the back corners of the case and how it covers the charging and aux ports. The buttons feel nice to push as well. I love the case but I've only had it for one day so hopefully it continues to impress. Fits nice with my Ballistic glass screen protector too. MAKE SURE you read the packaging instructions. You'd think putting a phone case is a no-brainer but there is a clear plastic on the inside and outside of the case to protect it. I would of never noticed and left it on there if i didn't read the included directions- which would of made it not as nice looking and could possibly scratch the back of your phone..maybe.. who knows, just take it offUPDATE: so I've had this case a little longer and it's still great. Still love the sleek design and way it feels in my hand. Took case off and there's so scratches or anything. But like some reviewers said, it does get a little yellow on the sides. I wish I could find a way to fix it or prevent this because i love the case so much. Might just buy a new one. Not sure yet.

I knew I was going to like this case as soon as I hit the buy button on amazon. My brother has a similar case on his iPhone 6 plus and I dig it. Anyway back to this case. This case keep your iPhone super slim, and feels great in the hand. Its got the grip around the edges of the phone that you need to keep it from falling out of your hand. The grippy bumper on the case is "cushiony" and feels very sturdy. I'm not going to test it lol but it seems like it will absorb a fall just fine. The cut out for the mute switch is fine and does not make it hard to use. The camera cut out is also recessed just enough to protect the lens. To top it off the case has what i am going to call hooves, on the bottom to raise your phone off whatever surface you place it on slightly. Good for keeping hard surfaces from scratching your case up. The volume and power buttons work without a hitch, I really like the button covers on this case. Some cases just cover the buttons completely and make them really mushy and hard to press. This case has a precise cover over the buttons. My favorite thing about this case is the built in dust caps for the headphone jack and lightning cable port. I hate seeing them fill up with dust and lint after sitting in my pocket all day. I don't know why case makers don't do this with every case. It's a must have! I'm not sure if this case will stand up to extreme conditions or a beating, but I take care of my phones. So i'm not worried about my phone taking much damage with this case on it. If you're looking at this case, Get it! You'll love it.

Aesthetically speaking, the case is one of the best I've seen on site. It is simple and minimalistic, and easy to install. It's not bulky, and feels compact even after three months of using it. I got the Fusion Crystal View, and even then, the color and hue of the case didn't change. It didn't turn yellow. The dust cap, though it did its job for the first couple of weeks, was pretty useless afterwards. I had to constantly take out my phone from the case and clean it, since the case seems to catch dust particles. In addition, the caps turned a tiny bit loose, especially the one capping the aux jack. In aspect as a phone protection, I've dropped my phone a handful of times, about three feet from the ground, and I was happily surprised that the case absorbed the shock and protected my phone from screen damage.The "HD Screen protector" has the quality of a typical complimentary screen protector that comes with any other cases. I bought ones that have the same quality for under a dollar.All in all, it was a satisfying purchase, and beats other $20+ case in design and quality. If you are looking for a cheap, yet sturdy product, then this is a top "go-to cheap case" for you.

The case itself is as mentioned in the product description. The only down side is the bulk of the case which kinda takes away some of the sleekness of the iPhone 6.Definite buy for people who drop their phones often as it does protect the phone remarkably well.

I bought the FUSION-CRYSTAL VIEW. At first I was considering the Clear Mint, but reading some reviews got me bit worried about it being discolored after awhile, so I went for the Crystal View. The design of the case does not disappoint. All the cut-out holes align perfectly and the dust caps do snap in place to protect the charging and audio ports (a nice bonus feature that made me choose this case over the Spigen). Another thing I like about this case is the cut out for the bottom speaker slighter wider and not too narrow like some other cases I have considered. The case is made of 2 layers and thick enough to protect the protruding camera at the back. The 4 corner rear guards are also a nice feature because they lift the phone above the surface, more protection for the camera lens and prevents the back from getting scratched. The lift design on the front also protects the phone screen from getting scratched if the phone is placed face down. All in all the case is exactly as described.As a bonus, Ringke included a complimentary screen protector. The screen protector itself is the same size as all regular screen protector out there (except the ones labeled "full cover"). The included screen protector covers the flat area of the screen (as you all know the iPhone 6 has curved surface).If anyone needs to see how it actually is, just watch this video review https://www.youtube.com/watch?v=2iplfoSbUvcThis video helped me decide on this case. I definitely recommend it.

I absolutely Love it!If you are thinking of Buying an iPhone 6/6s cover - This is your One and only great choice!NOTE: It comes with a Plastic Screen Guard !!!!This is the best cover/case you can get. Once you put it on you realize you might not actually need the screen guard at all.Fit = PerfectProtection = Has ample back casing to protect the sapphire glass camera and spreads ahead to the screen to protect it from the front.If you place the iPhone upside down, the screen wont touch the table.Buttons = You can still hear the clicks and covering is ample.Bottom Caps = Protects the base openings from dust and fit in perfectly.

As with all Ringke's FUSION series cases, this case is great! Adds minimal bulk, and the buttons give a very satisfying tactile feel, arguably better the phone naked.The TPU frame hugs the iPhone and keeps it in place, and fits snug. I'm using it with a tempered glass screen protector, and the TPU frame does not obstruct/compromise the glass.There are four "feet", on each corner, at the back of the case. They add some lift when you place the phone screen facing up; so the clear back doesn't get scratched easily. These feet are made of the same TPU material and adds grip to the surface.I've been using other FUSION series cases, on other phones for several months, and they're not showing any sign of discoloration, and the polycarbonate back can resist scratches pretty well!On the 6, the case actually improves the ergonomics of the iPhone; making it feel better to hold.Does not deduct any point:Not feeling too hot about the port flaps, though I'm sure some people can appreciate the added protection. If there's the option to go without the flaps, that's the model I'd choose.Why don't I like the ports? They become slightly annoying after a while, having to open/close. I understand some people like the flaps, hence why I think it's unfair to deduct points.having said that, the ports are easy to open and close, and isn't obstructing the lightning/audio cable when plugged in.I really have to add something unrelated to the product itself:I purchased a similar case, from another manufacturer called i-Blason, and they're terrible and the actual product is different from the photos on amazon. Ringke's products photos are as real as they get, what you see on the photos is what you're going to get. I really REALLY like Ringke, and I