f:{"metadata":"$15:metadata","error":null,"digest":"$undefined"} 35:T6e1,

About us (Solu ), Professional factory of circuit boards for Arduino, welcome to our store for more choices with best price. What we pursue is your satisfication of our service, not just for our goods.For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. we will reply you about any question you ask within 24 hours

Specifications :

Laminate FR4 1.6+-0.15mm
2 layer, 35μm copper
Red Soldermask - both sides
White Silkscreen - both sides
Power Input: 12V or 24v
copper plated holes
resistance between 1.0 and 1.2 ohm
Dimensions (Outer): 214mm x 214mm
Dimensions (Heat Bed): 200mm x 200mm
All features from MK2A and you also can operate this board now with 12V or 24V.
A central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity.
The pads to solder onto have been greatly increased as shown in the picture below. The picture shows the wires prepared for soldering routed through the holes for extra security. This does not remove the need to use proper strain relief.
Come with resistor and LEDs soldered,basic soldering skills needed to solder the power wire
Please note: ABS filament is not recommended.

Package Includes :

* 1x PCB Heatbed MK2B

40:T29e8,