selizo Watch Link Remover kit Watch Band Tool with 10 Extra Pins for Watch Band Link Pin Removal and Watch Sizing

Muy fácil de usar, hace poco me compré un reloj y no me quedaba y gracias a esto mudé ajustarlo y usarlo, súper complacida con mi compra, también trae repuestos en caso de que se quiebre puedes tomar otro respuesto

As described, just what I needed.

Not as good as more expensive ones

Muy práctico, fácil de usar y sobre todo muy bueno para ayudarte a recortar ese reloj que tanto te gusta pero no usas porque te queda grande

A number of the reviews I read before purchasing this watch band link remover were not positive but the price was right. The little height adjustable platform was very imprecise as reported by others. Nonetheless, I tried to use this on a watchband for an Omega Seamaster 200 and it failed for two reasons:1. The pusher pins aren't long enough to push the internal watch band link connector pins past the second internal friction bushing.2. When I screw the height adjuster up high enough to align with the tool's pusher pin, the screw unit that holds the pin hits against the side of the height adjuster table with the result that the pusher pin can't reach the watch band at all.I figured that I wouldn't be totally pleased with the quality of the product but I had hoped that it would at least work with a little jiggering. No such luck. At least it was cheap.UPDATE - Upgrade in my rating from one to 3 stars. After this item didn't work, I did some more looking at other sites for a watch band link remover. It turns out that my watch (Omega Seamaster 200) has extra long link-pins that require a unique long "drift pin" in the link-pin removal tool. this explains why the Selizo tool's drift pin was too short for my specific requirement. It still doesn't excuse the fact that the holder for the drift pin collides with the adjustable base that holds the watch band when it's elevated. I could have worked around this by leaving the adjustable base low and putting something like hard cardboard on either side of it to hold the watch band at the proper height without interfering with the movement of the drift pin but that wouldn't have made any difference based on the long link-pins of my specific Omega watch. I think I've found what I need (not on Amazon) though it cost about 4 times more.

Selizo Watch Link Remover kit Watch Band Tool ... sloppy design / tolerances. The circular base flops around and DOES NOT provide a firm surface to rest the watch band on! The face where the watch band presses up against is NOT SQUARE, so the watch band tends to shift out of position while attempting to press the pin out, and causing the bracelet pin to possibly be driven into the vertical face! The supplied press pins are WEAK, and bend easily if everything is not perfectly aligned. Managed to get my Invicta Watch Bracelet adjusted, but took a LONG TIME, and bent several push pins in the process. Save yourself a lot of aggravation, and DONT BUY THIS TOOL !!!

Muy útil y fácil de usar.

Good prouct