KLEAN-STRIPAircraft Ultra Paint Remover - Powerful Formula Strips Automotive & Metal Coatings, Visible Lifting, Fast-Acting - 1 Quart

Works very good. Poured it on and brushed it fairly thick. Covered with plastic and waited about an hour. Took the paint off of an Ingersoll Rand 120-gallon compressor tank that I'm turning into a horizontal offset smoke. A few spots were stubborn, but I probably spread it too thin. Ventilate well and make sure you use a good respirator, because the fumes are NASTY!

This stuff worked very well for my application although I needed to put a layer of plastic wrap over the top so it wouldn’t evaporate so quickly during a mildly warm day this allowed the chemical to stay on longer and work longer

Stripes like a champ!!!

Almost as good as the original stripper before changing to safer (lol) ingredients. Removed 4 layers on old car after 3 coats but, fumes are horrible even with respirator.

It works grea, much better than the average cleaner.

followed directions is a subpar product, I bought a cheaper stripper work as good or even a littler 1/4 of the cost

I used this to strip the paint from my gravel bike and it worked great. Just be sure to wear a respirator because the fumes are strong. Best to do it outside. Once it’s applied don’t let it dry after a few minutes pick a spot and wipe with a rag and wear gloves. The paint should come right off and you’ll see bare metal. Use plenty of clean rags so you don’t rub paint back on. In the end you’ll need light wet sanding to get total bare metal.

Love how aggressive it was w automotive urethane paint. Made job easy