FTC Magnifier Mount with Fast QD Lever 2.26"/2.91" Optical Centerline Height,Quick Release&Flip-to-Center Mechanism,Compatible G30,G23,G33,G43,G45,3X,6X Etc

I've seen some reviews about this saying the quick detach will break after your first use blah blah I think some of those people might be incompetent not knowing to adjust their quick detach tension screw before locking down otherwise yes you can break your QD Mount on any equipment for that matter if they are not set correctly, now with that said make sure you check your QD tension before you fully lock it down , this is a 10 out of 10 for me for the price same exact thing as the original one they knocked it out of the park for me, when opening and closing the riser you hear a smooth crisp ball bearing Audible quiet click to hold the mount in place while opening or closing, the quality is there, and to check your QD mount remember make sure it is unlocked and then you press on the QD itself and on the opposite side the NUT will come out of the socket and that is how you loosen or tighten the QD mount to customize to your rail ,mine came a little tight and I knew there was some adjustability somewhere and that was easy to figure out and simple to do, SO if you're considering getting one of these I would just do it you'll save hundreds use that for ammo.

QD is the downfall. Buy this and expect to replace QD before using.

It works great, fit my EOTech G43 perfectly and aligns it well with my knockoff riser. The screw quality is fine, it’s snappy and hasn’t budged since I mounted it. Would definitely recommend

IF YOU WANT A UNITY KNOCKOFF, this is it, im 500 5.56 rounds in with an eotech g45 magnifier mounted, witness mark applied to the screw, and qd held well. Not really any wiggle which is nice and the bearing is solid and gives a good feeling. No markings are present on the arm or base but thats to be expected. Finish is nice, nothing special and i wouldn't trust the optic screws it comes with.Pros- Cheap (compared to $270 for unity)- Good finish-good feel in the weight/movement-doesnt need to hold a zeroCons-no marking-very slight wiggle but not noticeable when shooting (probably due to QD)-QD retainment latch wont always clasp shut, sometimes had to force it- magnifier might hit rifle rails but i suspect it will do that on Unity tooverall good buy for quality and price. Id stick with a unity eotech riser though just for reassurance lol.

The Good:Build quality is pretty good, no complaints. The mount and the clamp work well, contrary to what most on here say about it. You just have to adjust it properly before clamping it down.The Bad:As someone else stated in a previous review, the magnifier does hit the rail in the bottom position. This could lead to issues and will 100% result in blemishes to the rail and the magnifier. I'm running a G33 magnifier.Verdict:Probably still worth it compared to the real deal. It's a $200 difference, what do you expect. Blame the OG manufacturer for charging $300 for a small piece of metal that moves (though I'm sure they make this one for $1 in China and sell it for $60 but I digress). IT WORKS.

This mount is almost indistinguishable for the real FTC mount however SIG designed their magnifier to have the recoil lug fit into the magnifier and not protrude from the magnifier the way Vortex does. If you buy a real Unity FTC you will get a little plastic oval keystone that says SIG on it to mount onto this mount properly. The four screws might hold it in place without it for light duty but I probably still wouldn't. This model will not work with Holosun but will on a Vortex. If you can iron out the mount compatibility to your magnifier it works well.

Highly recommended

PURCHESED ON NOV. 19th, 2025. After about 200 rounds the mount developed a slight wiggle in the hinge, enough of a wiggle it doesn't set exactly center on the red dot. anymore. I 100 percent regret this purchase. Now I will purchase the Utility FTC which means I wasted 70 dollars on this POS. not happy. If you actually use and train with your firearm DO NOT PURCHASE THIS ITEM!