ProElife Ultra Slim Decal Skin Sticker Cover Protector for Microsoft Surface Pro 6 2018 / Surface Pro 5 2017 / Surface Pro 4 12.3-Inch (Not Fit for Surface Pro 7) (Red)

I bought this based on the picture. What the picture does not show are the rather large gaps around the edges and the especially large gap between the two main pieces. If I line up the camera holes, it is nearly 1/16"-1/8" of a gap between the two large pieces at the hinge. Just does not look that good. Also, they did not bother to remove the die cutouts for the ports either, so you end up stretching the sticker trying to get them off, sometimes breaking the sticker in the process, or it's awkward and sticks to itself.Very challenging installation, because all pieces are on one page. You could maybe cut the pieces off the page to enable a stick-and-peel install, I suppose.I suggest getting the silver, and not the grey like I did. That way, the gaps will be more camouflaged. This is definitely not precision cutting. Kinda bummed out. But, I guess it will provide a bit of protection...On a positive note, the actual material looks very cool. I bought the darker grey.

Bought the grey for my Surface Pro. Looks very sharp. Includes a sticker for the back and all of the sides. Cut-outs are precise and the material has an excellent quality feel. Come off easily and without leaving any residue behind. Installation is a bit challenging and takes some patience, just because you need to line things up perfectly. Fortunately, the material is very forgiving and allows you to pick it back up for realignment and removing bubbles. Just be sure not to let the material fold back on itself. Also, when you are removing the film from the paper backing, be sure to use a mechanical pencil or other sharp instrument to make sure the small hole cut-outs stay behind on the paper (e.g., for the back camera). Otherwise, you will have to remove then later which will be tough. At this price, a very good body cover for the Surface Pro. Recommended.

Material isn't bad. However, when I took it out of the package, it looked like it had been handled and crinkled around by about 7-8 high school boys. Anyways, started with the larger pieces on the back. Pretty straight-forward, and air bubbles are pretty easy to push to the edges and get rid of.The major downfall of this decal setup are the edge pieces. I don't know if they did not set up their machine right, or measured wrong, but nothing is quite cut right. You can see from the photos that nothing matches up. If you get the corners matched up, the rest of the decal is off a bit. Sad, as this could be quite a nice set up if done properly.

Overall it's a pretty good skin/protector for my Microsoft Surface Pro. I only gave this 4 stars because the decal for the edges isn't 100%. I would say it's about 98% designed and cut precisely. It's really at the corners where the 2% isn't fully developed properly. It's easy to apply and it's easy to peel off to make adjustments as needed.I ordered the A-wire drawing-Blue color and it's as accurate as the photos show despite it being a rendering in the Amazon selection. Also for the bottom kickstand panel, it's slightly off and if you attempt to line it up with the logo, you'll have an uneven edge.

I bought this product expecting that A) it wouldbe cut for the Microsoft Surface Pro 6 and that B) at least the back stickers would match up and be usable. I saw the other reviews and I already knew that the side stickers were pretty ghetto and I was planning on experiencing that and not using them.When matching up the holes for the camera on the back decal top you can see from the photos that a significant amount of the sticker goes over the side. The same was for the bottom piece of the sticker when matching up the Microsoft logo - significant amount of the sticker going over the side. This is just not usable which is a shame because the print quality and material seemed nice.The package is clearly labeled for the Microsoft Surface Pro 4. I don't know if the dimensions are 100% the same but even if they are this still doesn't fit the Microsoft Surface Pro 6.Your mileage may vary. For $32 you can get your front and two back stickers from DB brand that definitely will fit your machine. I went back to Amazon and I opted to get a mightyskins sticker combo of front and back for $15 in the same design. In my opinion that's a decent price, it's three different stickers, and most importantly it fit well.

This looked amazing. I was buying from DecalGal online, for about 3 times the cost, when I happened across this skin. This fit perfect and the printing was vibrant and crisp. I will order skins from this company next time I want a change. I don't do a lot of reviews but for the cost saving and great looks I thought this product deserved one.

I got this because I had a SP4 and had a similar sticker. Different brand, but I figured they're all the same. I was wrong. I'm going to try and find the brand I got before and rip this one off, because this one is garbage in comparison.The big parts work fine. They are the proper size, but the ones around the sides are a joke. They are cut with these weird little angles to make it look like it's going to fit around the contours, but let's face it... it's a 3D item that you've just cut a piece of 2D paper for. I put the sticker on, left it overnight. I grabbed it at about 6am the next morning, threw it in my bag, had a 6 hour flight, and when I pulled it out at my destination, it had started peeling in multiple spots. I didn't even really move it. That's just the movement of it being in a bag, designed for laptops.Would not recommend.

So I have a caveat to my review: I put the decal on my device and additionally use an outer case for it. So with that in mind, of course I haven't experienced the stickers coming off because they are covered by a case. The stickers look super great and minimalist, definitely my go-to if I kept my surface at the office at all times and knew it wouldn't be rubbing around in a case or being transported. However, because I use my Surface Pro in many different places and travel with it, I opted for a protective case and sacrificed the minimalist look. I still recommend buying this decal!

I bought it to protect my Surface Pro 4 from scratches. Does not match the original colour exactly -- but not too far off. It does add a premium feel to the device with its brushed aluminium design. Also helps me grip the device, preventing any accidental damages. Please note that this isn't exactly precision cut. You will notice that the quality of the decal is great, and the adhesive is very forgiving, but it will not fit your device edge to edge. For the price, however, it will suffice.

My Microsoft Surface Pro 4 device has some scratches at the back. I bought it and my device looks as a brand new right now.I can recommend you if you have Microsoft Surface Pro devices.