YDmeetShower Head Holder, Adjustable Handheld Brass Shower Head Bracket, Wall Mount Holder, Drill Free Glue Installation (Polished Chrome)

Good holder. I used the construction gorilla instead of the glue included. I let it sit for 3 days. I taped ziploc bags all around the holder so that I could still use the shower. It has been installed for 2 months now and extremely sturdy.

Why did you pick this product vs others?:This holder is made very well. It's not plastic. It's heavy-duty.Hold:The glue holds the holder in place. I followed instructions and let the glue cure for 48 hours. The glue is super strong. Sturdiness:The holder is heavy and strong. This one will not break!Size:The holder side fits the shower wand perfectly.

High quality metal handheld sprayer holder that fit our sprayer perfectly. Oil rubbed bronze finish looks identical to the sprayer even though it's a different brand. Like others, I didn't see a sticker holder provided, so I just used painters tape to hold it in place and cure for 48 hours. Be wary-you'll want to remove excess adhesive immediately after mounting so you don't have problems with it showing like other reviewers (just used a Kleenex to wipe it up). Very happy!

Overall the quality of this holder is good, seems solid. My problem was with the glue that is supposed to hold this onto my RV shower wall - I glued it and was going to leave it for a couple days, but the glue would never set up enough to keep it on the wall. The seller should provide a faster-setting glue, or possibly a construction adhesive. So, my solution was to drill holes in the base plate and screw it to the wall (as the old one was). My shower wall has wood backing behind it, so I feel the installation is solid. The swivel mechanism in this holder is very stiff, so I have no confidence glue would have ever held it for long. I would also suggest the seller pre-drill holes for those who would rather do it this way. Now that it’s installed, I’m very happy with it. Shower head fits well onto it and the satin nickle finish is very nice.

I had the plastic mount that came with my oxygenics showerhead. I wanted to get a shorter hose, and they are easily available, nice stainless ones, but they don't fit the oxygenics holder, which is too large. All other holders, like this one, are a 'standard' size. Most holders I found have the cradle attached to the shaft at 90-degrees, which severely limits the range of motion and allows moving the showerhead in nonsensical directions. This one is angled, which means the showerhead can be adjusted to point straight or downwards. It has a nice brushed stainless finish. The ball-mount holds firm and moves smoothly. Very nicely made. It can't be tightnened, but seems like it is well made and will stay put and not sag.It is provided with a mastic adhesive, which must be cured for 48 hours. Since the plastic showerwall was not attached to the wall, I found that the adhesive is not enough, so I drilled 2 holes in the corners, and screwed into the wall. Solid. I also applied silicone around the top edge, so no water could get in to loosen the glue. Very happy.

After letting the glue cure, this is an excellent purchase. However, the included instructions are not great - they do not properly lay out the work required to properly set it up. The included stickers do not make themselves clear that they are adhesive - so I taped the holder onto the wall with blue painters tape myself, which worked well. I left it for 48 hours+ and it's been rock solid ever since. All in all - great product, not so great installation instructions.

It seemed small and inadequate- boy was I wrong. It holds the shower head at the level I need (I am handicapped). There is a ball in the device so it can be pointed in many different directions.Be sure to clean the spot in the wall thoroughly before gluing it down. Left it for about 2 days before using it, to allow the adhesive to dry thoroughly. I wonder I lived so long without this. Recommend.

This has to be the worst purchase I’ve made on Amazon this year.The product arrived with two tubes of glue — “made in Germany” — as if that somehow makes up for the fact that it’s missing the critical plastic support piece. That piece is meant to act as a secondary adhesive mechanism to reinforce the glue and actually hold the product in place. Without it, the glue alone is completely ineffective.Now I’m left having to remove the whole thing just to start over. The packaging was incomplete, the product doesn’t perform as advertised, and there was clearly no quality control before this was shipped.Absolute garbage. There are better options out there — do not waste your money on this.