Full description not available
Material | Stainless Steel |
Color | Stainless Steel |
Brand | ODesign |
Mounting Type | Wall Mount |
Product Dimensions | 12"D x 8.9"W x 1.8"H |
Shape | Triangular |
Package Type | Standard Packaging |
Number of Items | 1 |
Manufacturer | ODesign |
Part Number | AAM/056 |
Item Weight | 1.54 pounds |
Is Discontinued By Manufacturer | No |
Size | 2-Tier |
Installation Method | Wall Mount |
Number Of Pieces | 2 |
Batteries Included? | No |
Batteries Required? | No |
P**S
Great shelves if your walls are square
I've needed extra storage in the bathroom for a while, especially since the 2 kids came along. All the other fixtures such as the towel rail and toilet roll holder use suction cups as I didn't want to drill the tiles.The suction cups whilst ok for a while do come off every so often which isn't ideal for a shelf so I've been stuck not wanting suction cups and not wanting to drill. I then saw these shelves which use sticky bracket strips to hang them and thought they looked ideal.I started my holding the shelves up to the wall to check the positioning which is where I met my first problem. I found out my walls weren't square to each other meaning the shelf was either flat on one wall or the other. Not a problem caused by the shelf but it did identify a limitation over screws or suction cups due to the sticky bracket strips not having much / any leeway.I found another corner a bit better but not perfect (damn 50's house) so decided to give that a go instead.I lined the shelf up and drew a pencil line along both edges. I thought it better and more secure to have the top and bottom edge of one side touching the tile meaning a little wonkiness rather than just the top of both touching just to make it look straight and level.Once the shelf was marked up I moved it out of the way and used the lines to stick the brackets on. Smoothing out all the air bubbles. The brackets were then left for a couple of hours (longer than needed but I was busy) to affix properly.After that time I placed the shelf onto the bracket which was very easy to do and feels nice and secure.Only time will tell how long the brackets will hold for but so far I'm impressed.ProsSolid buildEasy to hangLook goodConsWalls have to be built with precision for the mounting to be perfect**** Update after 14 months ****The shelves haven't moved at all and look as good as the day I put them up. No rust at all.Great result!*** If you've found this review helpful, please hit the "helpful" button as it makes writing them worth while ***
R**T
Probably the best bathroom caddy without drilling tiles
UNBOXINGThe Oriware Adhesive Corner Shower Organiser arrived promptly with minimal no-fuss packaging (it came in a polythene bag inside a cardboard box). The set I received also contained an additional adhesive strip, which was thoughtful. The instructions leaflet was clear and simple.FITTINGThe advice was clearly given in the instructions to check first of all that the intended corner was indeed a right angle between the walls. It advised further that the adhesive strips be placed exactly horizontally using a spirit level, marker lines etc. As it turned out, the unit is very forgiving and has a high tolerance of slight wonkiness. This means that it is probably OK to fit the unit carefully by eye without the need for precision tools.The stickers are placed on the clean wall, and then the wire caddy is clipped to the stickers. The caddy can be taken back off the clips for cleaning if required. The second unit is placed either above/below the first one or, obviously, in a different corner altogether. The advice is to wait 30 minutes for the glue to reach full strength against the wall, and it also provides reassurance that if eventually desired, the stickers can be gently removed from the wall by applying heat from a hair dryer or similar.USEEach unit is a good size to hold several bathroom essentials, and after several weeks' use, I have had no hint of failure in any of the structure or adhesive. Compared to suction cups, which may be simpler to apply but which rarely hold this sort of weight, the Oriware Adhesive Corner Shower Organiser wins hands down.CONCLUSIONHighly recommended bathroom product and well worth the money.DISCLAIMERAs part of the VINE REVIEW PROGRAMME I received this product in exchange for a fair review. I have no further affiliation with the supplier or manufacturer.
D**W
Brilliant!
I have had these up for years now and they haven't budged a bit! Really easy to put up (just make sure you get them where you want them as once they are stuck, that's where they will live!) With a sticky back plastic type self adhesive. They also keep mould away as there isn't anywhere for water to gather and therefore go mouldy. Good looking item as well so won't detract from the look of your bathroom.This sticks way better than any suction cup alternative that I have found. Mine have been up for 2+ years and haven't moved at all. I would say these are as good as a screwed shelf section but with the advantage of not needing any tools to do the job! And you can remove these of yoy should want to.I actually moved home this year and am just in the process of buying another set for the new house.
F**N
Works when it's up.
The shelving is robust and even comes with an additional 5th adhesive strip in case you mess up. The advise in the booklet says draw a line to get them straight, but I'd advise against this, as the only thing that will work well on tile is a washable marker, so if you get the strip slightly out of line, you'll see the transfer of the marker line on the adhesive strip now stuck to your wall. It also advises using a hairdryer to remove if necessary. Please do not use a hairdryer in your bathroom, this is a hazard. It is able to be peeled off if you start with a corner. The clip brackets for the shelf attachment are a tight, a little too tight and may require some pushing, but once on, very sturdy nice looking product.
Trustpilot
4 days ago
1 month ago