S&Z TOPHAND® 32in x 84in Barn Door, 20-60 in Unfinished British Brace Barn Door/Modern Style/Solid Wood/Simple Assembly is Required

This door is excellent quality and well-designed for easy assembly. All necessary parts were included, making the process straightforward with no issues during construction or installation. It hangs securely and looks great—definitely a solid choice!

Update. 9/7/20. Second 36” door we ordered arrived today and you can see In the pics the board A is cracked in several places. One looks like they even tried to glue before sending. Other one is so cracked we could use this board as it break. Hoping for a quick reply from seller and a replacement board send ASAP. **got a reply a few hours later and board was shipped the next day. Very easy to assemble and look good. I actually had to order another door, 36”. When taking all the measurements I didn’t even think about the tandem hinges taking some of the length up so the two 28” doors don’t quite cover the closet opening and moulding. This has nothing to do with the door though and I ordered the 3rd door from here too. Also decided to put another coat of black stain on the existing door, while I wait for the other one to get here. I would suggest that when shipping more than one door, don’t bundle them together. UPS was going to leave it by my mailbox bc it was to heavy for him. It was raining that day and luckily I walked out when I saw him and told him I would help him get it to my door.

Who knew you could buy a ready-to-assemble barn door that was actually extremely sturdy and hefty? Welp, this one is all it claims to be and more! Super easy to follow instructions with diagrams! Took about an hour to put together solo. It didn’t mention gluing the joints, but I chose to do that probably added some time to the job.My one complaint is that one of the tall frame boards is bowed, so that when the door is hanging from the rail, the bottom right edge bows inward slightly, causing that edge to rub the baseboard when the door is op bed or closed. No way to remedy this as the board is clearly warped. My advice is to inspect integrity of the wood before assembling. I took away 1 star for this defect.

This might be the most disappointing product I have purchased on Amazon. The wood looks beautiful, and though it requires a lot of sanding and finishing it goes together nicely. I carefully followed the instructions, kept the door in the same room I intended to hang it for several months before assembling and finishing, and then carefully hung the door. For a few months it was fantastic, but then it began to warp, more and more. All 6 sides were carefully finished with 3 coats of polyurethane, but the door has now warped horribly to the point of being unusable. See the photo: well over 2 inches of bend from base to top. I purhcased four, treated all the same, and two are now completely unusable. What a waste.

Easy to assemble and the dimensions were accurate.

Great product. Stained well. Easy to assemble. Very sturdy

Second time I purchased this door. Both times the product arrived on time and without damage. During this assembly I used wood glue to secure all the panels together. It wasn't need as the first door is still working fine just added a little more strength. I didn't realize I ordered the wrong side door by mistake until it was fully assembled. I needed to cut about 1.25' from the top and bottom with did not compromise the strength of the door at all - glad I used the glue!!This door was hung with traditional hinges and not the normal upper track for barn doors. I cut the a few of the wooden dowels that come with the door in half and used them to plug the holes pre-drilled for the sliding door hardware.

Pros:The door parts are well made and fit together well to make a reasonably solid door.Cons:The foam strips double-sided taped to the sides of the outboard planks in the center of the door fell off because the surface was obviously dusty and the tape didn't stick.Holes are pre-drilled in the door for rail hanger brackets but not for the door handle, which is odd because the door handle is supplied, but hanger brackets aren't.The rail kit I bought (separately) had hanger brackets with mounting holes which matched the spacing of the holes in the door which sounds great, but the holes in the door are in the wrong location (top hole 1.5" from the top of the door, not the 2" I needed) so, if I used the predrilled holes, the bottom of the door sat on the floor and the wheels didn't touch the rail. The right hole location for the rail kit I bought would make two of the mounting bolts pass through screws holding side rail on the door. I found this out after fully assembling the door and it took me about 4 hours to rework the door to accept the hanger brackets.One of the cross brace pieces was pretty badly damaged, but we weren't planning to use them (they're just cosmetic)There seems to be a lot of filler in one of the center planks. I'm hoping it takes stain (haven't got to that stage yet).The door is also a little twisted but it looks good and is pretty solid; Overall, for the price, it's not bad.