Universal Motorcycle Helmet Camera Mount, Snowmobile, Full Face Helmet Chin Mount for GoPro Compatible with Shoei, Ruroc, HJC, and More

Love it

I have 2 of the Shoei Neotec 2 helmets and it is a hard helmet to find a center mount for. Not much room on it. I tried the Chin Mount brand but it wouldn’t hold my camera where I wanted it. I used a couple of extra GoPro extenders and that made it too heavy. So I went with the MotoRadd chin mount. I did drill and tap two screws in these for extra security. These new cameras are expensive and like I said, it’s hard to find a mount that works on my helmets. I can now mount my cameras anyway I want to mount them. Still used the 3M tape as well. I also bought the Flex Slim mount and put it on the windscreen of my BMW R1250 GSA and it holds the Hero 11 Mini, the Hero 4 and 5 Sessions cameras perfectly. And I also bought the MotoRadd GoPro mic adapter holder too. These products have allowed me to make videos like a PRO! Love these products! Great value, great price!

This thing’s solid. Threw it on my helmet and it’s been holding my GoPro steady ever since. No shaking, no slipping—even after some sketchy weather and rough roads.Setup was easy, didn’t have to mess with it much. It fits my helmet fine (Shoei), and it looks decent too. If you want to film your rides without worrying about your camera falling off, this’ll do the trick.

Works great. Easy to apply, has stuck on for months with no problems. I was able to keep it out of the way of the vents on my Shoei. Very low profile. When there's no camera in it, you can't even tell that it's on there, it just looks like a stock chin vent.

Mounts perfectly just underneath vent. It does block a bit of chin airflow with the camera in place, but I'll take that over the horrible aerodynamic properties of riding with a side mount or a teletubbie style top mount.The side wings are utilized approximately 85% and just the tips extend over the side vents on this particular model helmet. If you clean the helmets surface first with alcohol or simple green to get all oils off the surface it will stay in place just fine. I've used this particular camera mount with this particular helmet for 2+ years and have had 0 problems.I did have to buy a second mount recently which prompted this review due to having a large rock that got kicked up smacking the mount and shattering where the centerpiece joins to the wing. I feel that this speaks not only to the items durability but you should feel very secure with your camera sitting out front as mine never budged on that ride and held firm. Just make sure you're using quality 3M VHB Tape, clean the surface first, and you'll be good to go. Cheers.

First of the product seems to be great and fits nicely on my Shoei X-14. I installed this on my helmet about two weeks ago so it had plenty of time to properly hold in place. And before everyone gets upset, YES I DID CLEAN THE SURFACE of where I attached the mount. I went on a motorcycle ride today and had the chance to try this out and see how it holds. It was working as intended and didn't have any issue with it until when we were making our way back after the morning ride through the mountain. Out of nowhere, I noticed that my GoPro came off and went flying on the side of the road. I immediately stop and tried to look for my GoPro 4. After looking around for half an hour, I finally gave up. So much for spending a ridiculous amount of money for a helmet mount that would basically not hold up and send my GoPro flying, Now not only that I have wasted $40 on a stupid helmet mount, I have also lost my GoPro 4.Lesson learned here, either purchase a safety leash for your GoPro or freaking super glue this mount to your helmet.Thanks now I have to purchase another GoPro.DO NOT BUY THIS PRODUCT unless you want to lose your GoPro as I did. EXTREMELY DISAPPOINTED CUSTOMER HERE

It's alright, at least it's injection molded instead of chinmounts' 3D printed garbage. But, my biggest gripes are that the price is far too high for the parts you receive, and the adhesive will stick to your helmet better than it sticks to the plastic this mount is made from. If it doesn't fall off on its own, try removing it, you'll find this out for yourself. I'm mounting my GoPro via a ram ball mount/GoPro adapter, and with that mount my speedo is not visible. That's better for the kind of riding I do.

I cannot really attest to what helmets this can and cannot fit; but I did take some pictures showing the curvature and the measurements of the mount.HelmetStrength and Speed SS1600InstallationWas a breeze. All you do is snap the arms onto the mount, pull off the adhesive tape, and then stick it on to the chin of the helmet. It does include 2 alcohol wipes to clean the helmet area, and some simple instructions.AppearanceI think, as far as helmet mounts go, that this is one of the best looking mounts. It is asymmetrical, and isn't just hanging from one cheek of the helmet. It also has a very minimal look to it.LongevityI just put this mount on, waiting on my new GoPro to charge so I can take it out. So I cannot really attest to this yet...ProsLooks very niceAsymmetricalEasy installConsThe range is somewhat limited on how far the GoPro can tip up and downThe 3M pads are a little small, I might put a dab of superglue on the bottom of it just for insurance