Breast Pump Milk Collection Cup - Compatible with Spectra S1/S2/S9, Not Original Accessories, Replace Breast Pump Kits, 24mm Flange Milk Collector Cup Tubing Parts

These are a game changer. Let it be known that my first pump ever was a wearable that, while classifiable as torture per the Geneva Conventions, set an unrealistic standard for convenience. So when I switched to the Spectra s1, I expected to be able to walk around the house, do dishes, pump in the car, etc., not realizing how hard it is to do any of that with ginormous plastic bottles sticking out of your bra (also that I would need to buy specific pumping bras, since nursing bras don't work with conventional pump assemblies).I was ready to sell my Spectra, and go back to my wearables, accepting that while my milk would always be just subtly pink from the blood, and my nipples would exist as raw, painful nubs of flesh, I'd at least be able to pick up my baby or answer emails while pumping.These things gave me hope. I have the gentleness of the Spectra with the freedom of a wearable. If you assemble it with care and intentionality, the seals are good, and it won't leak as long as you don't bend too far over while pumping.As an added bonus, the capacity is higher than most wearables (8 fl.oz as opposed to 5), so they don't overflow on my first pump of the day like my Eufy did.

There is a pretty steep learning curve when it comes to getting third party pumping parts. With that said, when it is done right, this particular set is worth every penny and even made the crappy Medela Pump-in-Style pump that was free with insurance actually usable. The flange is very comfortable compared to any plastic flange, and the price is great relative to other third party parts sets (around $30).The suction is insanely good but only if you take several precautions:- Get yourself a nipple ruler to find the correct flange insert. The default size is 22mm, but the average nipple is 17mm. I found out the hard away aka painful nips for the first month of pumping. It's not supposed to hurt (but unfortunately you might still have some soreness).- Make sure that all of the parts of fully dry. If there is even a little moisture when you attach the parts together, you will not get a perfect seal.- Make sure that all of the pieces are assembled properly. Even if something is a bit crooked, you won't get a perfect seal. Recheck. Every. Single. Piece.- Make sure that the duckbill valves are not ripped or broken. Even the tiniest rip will prevent a perfect seal. Check this before every use, keep spares, and replace often. Almost all replacement duckbill valves are compatible.- While the top lid doesn't touch your pumped milk (where you connect the tubes), make sure to wash it (don't need to sanitize except maybe the first time) because any moisture or incidental milk that spills during the transfer process or if you move the wrong way will prevent a perfect seal. Before reattaching, make sure it is fully dry.- If the suction isn't perfect right away, stop and troubleshoot every single piece and check for moisture especially in the tubes, lids, diaphragms, and flanges.- If you're sure you did everything perfectly, it could be that your pump needs troubleshooting (battery/power issue, tube connection issue, etc.).Another reason I love these cups is that I was able to easily immediately adapt or frankenstein these cups and accompanying parts with all 3 of my pumps to make them all work:For the Pumpables Genie Advanced (best pump in my opinion): I could connect the tubes directly to the pump without adapting anything.For the Medela Pump-in-Style, I chucked the entire flange/connector set and only needed to keep the existing Y tube (which you can easily buy on Amazon). I cut the Medela V off of the Y right below the connector, and used the TOVVILD Y-tube connector piece to connect the remaining single tube to the TOVVILD tubes.For the Elvie Stride (not worth the $$$): I cut the single tube part of the Elvie Stride closer to the end that attaches to the pump instead of the connector, and I could use the tubes I already adapted for the Medela for this pump.How to not cry over spilled milk:Believe me when I tell you that I did this many times. Just take some precautions and be prepared BEFORE detaching the cups.- Make sure your work area is clean and prepped and your final collection vessel is ready BEFORE you pull out the cups.- Detach the lids with the tubes or only the tubes while they are still attached to you.- Once you detach the cups from your boobs, immediately tilt the cups with the flange facing up. Put the cups down on a stable and flat surface.- When you're ready to pour the milk out, instead of risking spillage by detaching the flange, just bend the flange away and tilt the cup down in the same direction as it would sit on your boob into your final collection vessel.- Move your collection vessel away so that you have room to clean up and detach your cup parts for cleaning.Hope this helps!

Hooks up great to my spectra! I bought mom cozy flanges and it was the perfect ft! I intend to only use for work and noticed I started getting more output! I average 10 more oz a day using these cups! These cups are also very convenient to slip in your bra and not have to worry about the cups hanging from your bra. The only downfall is that I’ve had 2 set and both suction cups on the inside stopped attaching. There is the 6 month warranty so I’m not too worried. I’ll keep buying them because of the convenience and makes pumping while feeding soooo much easier, plus I get great output!

These pumps have been a lifesaver! I didn’t love the original pumps that came with the spectra and I didn’t want to hold them the entire time I pumped. These came in handy and have been absolutely amazing! The suction is honestly probably better with these than the ones the spectra came with originally!

I’ve been using the TOVVILD milk collection cups for a few days now, and I’m genuinely impressed. They’re comfortable to wear and fit well with my existing breast pump setup. Suction was consistent, and the design made it easy to move around without worrying about spills.Cleaning is simple too, which is a big plus during postpartum chaos! I did notice a little condensation buildup during longer sessions, but nothing that affected performance.Overall, a great buy for the price—would definitely recommend to other moms looking for hands-free convenience without breaking the bank.

My advice? Invest your money in something better. I bought these to fit my Spectra pump so I could pump hands free in the middle of the night while feeding my newborn. These leak. A lot. I’m talking they soaked my bra in the middle of the night. I’ve tried so many ways to try to make them not leak. Nothing has helped. On top of losing a lot of breast milk, half the time, they don’t work. I have to fiddle with them to get them to work properly. I’ve only had these for two weeks, there is not reason for them to not work. I wish I bought a different one for a little more money, then buying these. I bought them to make my nights easier & they’ve made my nights worse. They suck.

Works great with Spectra 2. Needed to replace because I noticed a small slow leak on one of the cups when I left my breast milk in there.

Amazing! Got my exact output i do with my spectra bottles & org flanges it comes with. I read about leaking, so far i dont see that. Just make sure everything is sealed! So quite and good quality. Was nervous about ordering, but so thankful i did!