Vgate iCar3 Bluetooth OBD2 Diagnostic Interface for Android / PC iCar3 bluetooth: support android system Features: 1.Supply voltage(VDD):12V 2.Work temperature range: -20 ~ +70 3.Storage temperature range: -40 ~ +125 4.RF sensitivity(Basic Rate): -85db 5.Modulation Mode: GFSK 6.Frequency Range:2402 ~ 2480MHZ 7.Transmission Range:10M 8.Bluetooth Profile:SPP 9.UART Params:38400,8,n,1 10.Small size, compact structure. Plug and never unplug 11.Stable wireless connection 12.No wires or batteries (adapter is powered by the diagnosis size sockets) 13.Stop communication, wait half an hour, auto sleep 14.Supports almost OBDII protocols 15.The adapter uses the fastest and most reliable ARM chips Function: 1.Read, erase and display code descriptions problems - both standard and spetskodov manufacturers. 2.Measure the fuel consumption. 3.Display real-time operating performance of the car, such as momentum, vehicle speed, oil pressure, coolant temperature, engine load, intake manifold pressure, throttle position, the values of oxygen sensors, air intake temperature, and more. 4.Turn off the MIL (signal Check Engine). 5.Download data to external media in a variety of formats for later printing. 6.Record various parameters, display graphics in real time, and more. Support Cars: 1.ISO9141-2(5 baud init,10.4Kbaud) 2.ISO14230-4 KWP(5 baud init,10.4 Kbaud) 3.ISO14230-4 KWP(fast init,10.4 Kbaud) 4.ISO15765-4 CAN(11bit ID,500 Kbaud) 5.ISO15765-4 CAN(29bit ID,500 Kbaud) 6.ISO15765-4 CAN(11bit ID,250 Kbaud) 7.ISO15765-4 CAN(29bit ID,250 Kbaud) A.SAE J1939 CAN(29bit ID,250*Kbaud) B.USER1 CAN(11*bit ID,125*Kbaud) C.USER2 CAN(11*bit ID,50*kbaud)
A**N
Very good.
I tried it with "ODB Fusion" on iOS and it connected immediately. Everything seems to work. The device is very small, which is an advantage over others I tried as I can close the cover that normally hides the ODB connector on the car I tried it (2017 Ford Focus RS). Pleasant surprise: the device has an auto-power-off feature where it enters a low-power standby mode after 30 minutes of inactivity. I wish the power-save delay would be shorter than 30 minutes, but it's better than nothing and it won't drain the battery if you forget it and inadvertently let it plugged for a few days.
A**E
Works, but not as advertised "* Small size, compact structure. Plug and never unplug"? NOT!!!
Vgate iCar 3 WiFi Elm327 Auto Code Reader Support OBD2 Protocol Scan for IOS (Black-White) The adapter work well.One of the selling points is that you can plug it in and leave it plugged in, because if you do not use it for 30 minutes, it "goes to sleep" and does not drain the car battery. From the product description: "* Small size, compact structure. Plug and never unplug" In my car it is almost impossible to plug this adapter in without sticking my head in the driver's footwell, so I was looking forward to be able to leave the adapter plugged in all the time.What it the description doesn't tell you that in order to wake the device back up, you need to unplug it and Plug it back in. So the big selling point ends up being false advertisement.
H**I
One Star
Defective on arrival. Could not connect to phone
Trustpilot
2 months ago
1 month ago
