EBXYAXLR Cable Microphone Cable 3M 4 Pack 3-Pin Balanced XLR Male to Female Cable Multi-Colored Mic Cord DMX Cable Microphone Patch CableGlobal Recycled StandardGlobal Recycled StandardGlobal Recycled Standard

I needed a bunch of 1m XLR leads.These all worked, the colour coded ends are very useful.They threw in some velcro cable ties and DMX Terminal Pin which was niceI will buy again when I need some more

Great leads, got them to go between our mixer and amplifier. They seem off good quality, tight connectors that are well soldered and nice thick cable. Do the job we wanted them top perfectly, they work absolutely fine and how they should. Price is more than reasonable too. Very happy and would definitely recommend.

These are XLR cables , female to Male. They are short at a meter so ideal for short runs and XLR patch bays.Curiously they come with a spare plug to terminate a DMX (lighting control) chain as it has a resistor fitted , I checked. The soldering inside is neat and well done and the strain washer and rubber strain shield are decent.Price is standard for 4 cables at this length and the XLR plugs are certainly good enough to last for a while. I wouldn’t like to do a world tour with these , but they are certainly good enough for 95% of scenarios most people will use them for.

As budget microphone cables go these are pretty good.They seem to be well-made and have a fairly solid feel to them. I do a lot of acoustic guitar recording with room mics and needed these cables for setting up two stereo pairs, one close-up and one at a distance. All dynamic mics running 48v phantom power.The audio quality was very good. No discernable noise was present and I was very pleased with the results.

I regularly use a multichannel portable recorder with an array of microphones to record vocal groups and find this EBXYA pack of four 1M XLR Cables is ideal for that purpose. The cables have useful colour coding at each end to enable easy channel identification and the plugs are securely attached. They are a good fit into the sockets of my microphones, recorder and mixer and appear well made and sufficiently durable.The are supplied with four hook and loop ties and a DMX plug for use with lighting controllers. Having used the cables a number of times they have performed flawlessly proving good quality signal transmission with no drop out. They can be used as patch leads to connect rack processors to a mixer or any other situation where this length is suitable. Overall I am very happy with their quality and performance.

EBXYA XLR Cable 1M 4Pack XLR Male to Female CableThere are 4 cables supplied in this pack, these are balanced male to female XLR cables. Each cable has a different colour ring around the base of the XLR connector, this is very handy for identifying what cable goes where when more than one cable is used. I use quite a few of these type of cables in my guitar rack stand, I have several rack units connected via XLR cables to a mixing desk, with coloured connectors it makes tracing cables so much easier.These cables are just 1 metre in length which makes them ideal for use in my rack system, longer cables tend to make the wired up system look untidy and more complicated than it is.The cables work out around a fiver each so they are not expensive. The quality of these although not the highest, is pretty decent, some brands can be many times more expensive. But considering the price, these are pretty good and certainly work as intended. The cable itself uses oxygen free wire strands for superior connectivity, this is double shielded to help eliminate any outside interference, this in turn has a tough PVC outer sheaf. The XLR connectors are made from blackened metal alloy, the internal pins are gold plated, again for superior connectivity.In use these work as expected, the connectors feel tight in their sockets and do not cause any hiss or crackle when the cables are pulled or wiggled. Overall I'm pleased with these, they are decent quality, look good and perform well. Plus, I was pleased to find 4 x velcro cable ties in the pack, along with a spare male XLR connector.CONTENTS:4 x XLR Cables1 x XLR Connector4 x Velcro Cable TiesThank you for reading my review, I hope you have found it helpful.

I use lots of patch leads like these, so a pack of four decent quality ones for under £20 is very welcome. I use them when I'm doing live sound, for connecting the mixer desk to the small PA amp we use for pub gigs. I also use them to connect rack-mounted effects to my USB interface for recording. Not to mention the miles of patch leads behind my guitar rack system.These leads use a 3-core, balanced cable, and connectors which are a good facsimile of the leading brand. They have a compression strain-relief inside the connector, and a flexible boot on the outside. These are tough plugs, and should stand up to regular use.The cables even have coloured identifiers on the plugs, so I can quickly see which is which, in the rat's nest at the back of a rack unit.Overall, I'm very happy with these cables. I usually make up my own, but the leading-brand plugs costs £6 EACH. To make this set of four leads would cost me £50, even with a bulk discount. At £20 for four, these are worth buying just for the plugs!

Great set of short length xlr leads.we use a fully mic'd drum kit and these short length xlr's link the drum mic's nicely to the snake drum without excess leads trailing everywhere.They feel good quality and do the job asked of them.will be getting more to do the rest of the drum kit.+++AAA