Litever Kitchen Under Cabinet LED Lighting Kit, Super Bright, 6 PCS 12 Inches Light Bars, Plug-in or Hardwire Power Adapter, 31W 2000 Lumen, for Cabinet Counter Shelf Workbench (Daylight White 5000K)

The media could not be loaded.  I absolutely love this lighting. I installed it because I didn't want to wait for my husband to do it(and I'm not very handy) and It looks amazing. They give you the option to use all double sided sticky tabs to install everything or they also provide brackets and screws. I decided to use the brackets and screws as I noticed they do get warm after being on and I wasn't sure how that would work with the adhesive long term. The lights snap right into the brackets. They provide tons of extensions for them of which I only needed one to install over the gap of the microwave/range. They provide cord holders that are also installed with the sticky pads and they work great. You can't even tell that I installed them under the cabinets. The cords were extremely easy to conceal. They have a dimmable option to install with them... Just an extra cord you plug in. It also came with adhesive backing so it was easy to conceal under the cabinets. I decided to go a step further and I ordered a Bluetooth enabled wall outlet that was controlled by Alexa for voice enabled use. So now all I have to say is "Alexa, turn on/off the kitchen lights", and they turn on/off. These lights are easily the best bang for your buck. You cannot beat this price.. They look professionally done! I'm beyond satisfied!P.s... go with the warm white color... it looks more natural and less artificial. Adds warmth to the environment and less strain on the eyes.

bright light, easy to install, easy to customize, seems to be holding up well. I installed the lights under a dark corner cabinet. Solved the problem with minimal work, convenient access, and good appearance.

I have purchased multiple components kits, project kits, DIY kits, and a variety of technology and consumer technology kits. I have done enough cabinet making to be very frustrated when a low quality accessory brings down the appearance and quality image of the end result. I have never seen a product that so exceeded my expectations. This lighting product far exceeds in every category. The quality of the lighting once installed is outstanding. The attention to modular design that allowed me to configure the installation to our particular cabinetry was an 11 or 12 on a scale of 1 to 10 allowing me to deal with blind drops and end runs for power elegantly producing a very attractive end result. Not only were each of the components in the kit, well made and demonstrated good manufacturing craftsmanship, the installation package was exceptionally complete providing a variety of mounting options, interconnect options, power extension cables, interface cables for IOT, screw type mounting and adhesive mounting options along with useful well written installation instructions. My only regret is that I can't buy all my kits from this company. Product engineering and manufacturing, this product is a home run! Keep up the good work.

Very high quality. Easy installation. Good price. Adjustable brightness. Fit the bill perfectly for a dark corner of the kitchen.

I bought two sets for use in our kitchen. I purchased another brand’s set previously and the color temp was too high. I am glad I found these Litever units at 3000K because they match our kitchen lights perfectly. The install is pretty easy. The kit comes with cable management systems and extension cords. Note that while they are advertised as dimmable, they are only dimmable with the supplied roller dimmer. I tried to dim it with a Lutron plug-in dimmer and they won’t dim. Overall, for the price, the product is excellent and it really helps brighten up our kitchen space at night.

My project was under counter lighting in the kitchen. My wife wanted LED lighting with all the features including selection of color temperature. That would have cost over $600. After some searching and discussion, we decided we could buy both the 3000K and the 5000K Litever products to achieve color temp options, and the cost would be about a third of her original choice. I was initially impressed by the physical appearance of the product. The 12" light bars are made of durable aluminum, and the wiring is sturdy with molded connectors that are apparently a standard within the CCTV community. That means additional wiring options are generally available online, but probably won't be needed because extension cables are provided with the kit. The product has a very professional appearance. One thing I liked was that all the components could be plugged together to insure they worked correctly before installation. In less than a minute, I had the light bars connected and was testing the dimmer function. Everything worked as expected. Two things to note. One feature description said that you could either plug the power pack into an existing outlet, or if you wanted to direct wire it, you could cut of the plug from the power cord. This is not necessary since both types of power cords are provided; one that plugs into an outlet, and the other that has stripped wires for a direct connection. Another note is that there are molded plugs supplied with the kit, but no description of their function. After some thought, it became obvious to me that the plugs are terminating plugs. Since the light bars are plugged together end to end, and since they are all made with the same with a connection wire at both ends, the last light bar will have an exposed power connector. The molded plug is there to attach to the last molded connector so that the 12V power is not exposed to external events that might short the power supply. After reviewing my layout plans, I started working on the install. The light bars are held in place by plastic clips that screw into the bottom of the cabinet. All the other cable dressing components use adhesive backed pads to secure wires to the cabinet surface. I decided to mount the power packs to the underside of the cabinet as well, but did not trust the adhesive components to hold so I cut a half inch strip from some aluminum sheeting that I had, and made a band that wrapped around the power pack, and then secured it with 3/8 inch screws (note that the major hardware stores do not carry wood screws shorter than 1/2 inch - the only screws I could find were sheet metal screws, but they work just fine). I also used some standard wire ties, and some wire clamps that screwed into the wood where the bundles of wires seemed heavier than what I thought the adhesive would support. None of this may be needed in your install since a generous supply of clamps is included in the kit. Litever has done a super job of anticipating installation issues and providing needed components. The install was made difficult for me because my 60+ years have reduced my ability to bend over enough to view the underside of the cabinets, and my bifocals forced me to crane my neck to focus. More than once I was trying to find ways to lay on the kitchen cabinet so I could look directly up at the work area to make measurements for hole placement. Other than my physical issues, the install went fairly smoothly. I followed the advise of another individual and purchased a right angle drill attachment to allow drilling in tight spaces. As it turned out, I only needed it for one of the routing holes that I drilled. I was a bit disappointed that I had to drill 1/2 inch holes. This was due to the size of the connectors. In fact, I actually had to make my holes a bit larger since I had to route two cables through the same hole to support both the 3K and the 5K light systems. Once the install was completed, I was impressed with the result. We could select to use only the softer 3K lights, or only the daylight 5K lights, or set the intensities for a combination. I did have a couple of minor issues that concerned me, and this is the best news. I contacted Litever customer support to tell them that I seemed to get a bit of interference with my AM radio. They responded right away to let me know that this was not expected since the power packs go through FCC testing. They even told me that they went out to buy an AM/FM radio to see if they could reproduce the problem. They could not, but I was able to resolve my problem by relocating my radio an additional 6 feet away from the light components. This type of interference seems to be common with dimmable LED lights. My situation was not bad, but it was noticeable. Fortunately, either moving the radio or reorienting its antenna can resolve the problem. The best part of this story is that Litever customer service was exceptionally responsive. It is clear to me that they want you to enjoy their product, and they are willing to help you resolve whatever issue you encounter. I have had additional interactions with the company, and they have always responded quickly and with sincere concern to make you a happy Litever customer.

Three times as bright as the lights I had before and at a reasonable price. Comes with everything needed including self adhesive wire holders so that the final set up is so clean that the only wire you see is the one that plugs into the wall. Hard wiring is also an option but it looks great with a plug in and a lot less work.

We deployed these in our stock room under the shelves. Added a 3rd part switched AC plug that is motion activated and works well as a solution for us. Beautiful pure white light.Very happy with this purchase.

The price was very reasonable, and the product was easy/peasy to install. I would highly recommend and order it again if ever in need of under valance lighting again!!

Exactly what I wanted -- easy to install with either screw-in clips or adhesive (I ended up using both). The on-off switch is on a dimmer, which is a bit inconvenient, but the package included a "bonus gift" of an on-off switch which made the set-up perfect. I'm thinking about getting another set to run along another wall in the kitchen.

excellent product. Easy to install