Evolution Power ToolsRAGE4 7-1/4-Inch TCT Multipurpose Cutting Chop Saw

I was sceptical at first. Purchased it to cut some 1.5x1.5 1/8 thick angle iron for a project. Cuts steel no problem. I've cut about 40 pieces so far and it's still cutting. Small enough to easily pack up and bring to the next job. Better than my 1/4" grinder chop saw for the small jobs.

At 10 amps this little saw has a lot of power, it took me about an hour just to set up but once set up is all good.Overall, is a powerful saw that can cut through metal with ease. it comes with a general saw blade that cuts wood, plastic and soft metal. I decided to buy an extra saw blade that is specifically for metal use. That way the saw blade will last longer.i was surprised to see package comes with some spare safety glasses, as well as foam ear plugs as the machine is quite loud while in use. Safety Glasses and ear plugs was a good attention to detail.Overall this is a great little machine, however when using most important is you secure whatever you are cutting well, from the front end and the back end, because if not the item you are cutting can fly out. It happened to me, lesson learned.It performs nice straight cuts, so I'm happy with this purchase.

Appareil de moyenne qualité, lame a peu de durée ( dans mon cas 20 coupes). Ne forcer surtout pas la scie, le moteur est sous alimenté, les brosses se sont détruites après quelques usages ( ils en fournissent un ensemble d'extra, je me demande pas pourquoi???). Les instruction sont assez claires mais les photos vous montre que l'on peut couper un tube a plat ce qui est contraire aux instructions!!! Cela va diminuer rapidement la durée de votre lame . Coupe en 45 pas trop précise, l’étau glisse. J'ai malheureusement dépassé ma date de retour.Saw of average quality, Blade have a shorter life (in my case 20 cuts in .125'' thick) Do not force the saw, the motor in under powered, brush were destroyed after a few utilisation( they supply you with extras, I wonder why?)Instruction are clear but photos indicate contrary like cutting tubing on the flat, wich will reduce life of the blade. 45 cut is so so, vise let the piece move. Unfortunately miss return date. But after review, they sent me another saw... what a différence. KOODO'S to them. Good after sale service.

I’ve used this to cut 2” mild steel tube and it literally drops through like a hot knife in butter. No sparks, dust, or smoke…major improvement over the abrasive blade chop saws.

Es una máquina muy ligera y compacta ideal para transportarse pero muy eficiente, lo único que me gustaría es que el mango fuera en pocicion D de ahí en fuera es una maravilla.