Oneida Air Systems AXD001004 Standalone Anti-Static Cyclone Separator (The Dust Deputy DIY), Pack of 1

Oneida Air Systems AXD001004 Standalone Anti-Static Cyclone Separator (The Dust Deputy DIY), Pack of 1

Q: anybody put this on 30 gallon steel buckets? the galvanized ones for storing animal food and such?

Similar. 45 gallon fiber drum. 6 hp shop vac. Works like a charm.

Q: Is the flange at the base a standard size with a standard bolt pattern? If not, could I get the ID and OD dimensions?

Sorry I was slow to get back to you, been out of town. It is a 6 bolt configuration. Bolts I used were 5/16". From bolt to bolt is about 2 1/8". Straight across from outer bolt to outer bolt is 4 1/4". Inside diameter of Cyclone is 3" opening. Whether this is a standard flange I really don't know. You might check standard flange sizes somewhere on internet. Hope this helps.

Q: Will this work for wet pickup? Will it separate water from the airflow using a high-flow (approximately 210 CFM) shop vac?

Yes, water spray is denser than air material, and ANY such material will get separated in a vortex collector. You can put a special foam filter on your shop vacuum interior - the companies make these for wet pickup. This prevents crap from getting into motor intake. If you look at inlet port up inside where the interior of the shop vacuum filter covers, you can clean out leaves and debris there with a screw driver. But much better to not let it get in there at all, since the motor is not made to disassemble and clean. (It should be.)

Q: What is the size of the entry and exit ports?

For my aplication -a sears 2 1/4 inch vac hose to both ports--go to a hardware in the plumbing and get 2 fernco 1 1/2'' x 2'' rubber adaptor---these measurements are deceiving because pvc pipe that use these fittings is measured from the inside THESE GO OVER THE OUT SIDE OF THE PVC HENSE THE CORRECT MEASUREMENTS FOR THIS APPLICATION ----very easy assembly--or return them and try a different size,if yours is different than mine.

4.6/5

Product ID: 261505954

Secure Transaction

💨20% more suction efficiency

🔧Universal 2.0" tapered ports

🛡️99% dust & debris capture

Frequently Bought Together

Oneida Air Systems Dust Deputy DIY Anti-Static Retrofit Cyclone Separator for Wet/Dry Shop Vacuums (DD DIY)

Automatic Vacuum Switch, Ortis Vacuum Switch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Keep Your Workplace Cleaner, Better for Your Lung

Cen-Tec Systems 94698 Quick Click 10 Ft. Hose for Home and Shop Vacuums with Expanded Multi-Brand Power Tool Adapter Set for Dust Collection

Description

💨 Elevate your clean game—because your vacuum deserves a power boost!

EXTEND FILTER LIFE - Trap 99% of dust and debris before it hits your vacuum filter, cutting costly replacements and downtime.
ALL MATERIAL MASTERY - Handle everything from wood dust to metal shavings and even wet debris—one separator to rule them all.
MAXIMIZE VACUUM POWER - Boost your suction by 20% with patented Neutral Vane Technology—never lose airflow again.
VERSATILE COMPATIBILITY - Fits virtually any wet/dry vacuum with secure 2.0" tapered ports—customize your dust control setup effortlessly.
DIY FREEDOM MADE IN USA - Build your perfect cyclone separator with included hardware—engineered for innovation and durability.

The Oneida Air Systems AXD001004 Dust Deputy DIY cyclone separator enhances vacuum suction by 20% using patented Neutral Vane Technology, capturing 99% of dust and debris before reaching the filter. Compatible with most wet/dry vacuums via universal 2.0" tapered ports, it extends filter life and reduces maintenance. Made in the USA, this DIY kit includes the cyclone, gasket, and mounting hardware, empowering professionals to customize their dust collection system for a wide range of materials.

Specifications

Brand Name	Oneida Air Systems
Model Info	AXD001004
Product Dimensions	39.37 x 23.62 x 18.8 cm; 22.68 g
Part Number	AXD001004
Color	_
Certification	certified frustration-free
Material Type	Plastic, Resin
Included Components	Cyclone, gasket, and mounting hardware
Batteries Included?	No
Batteries Required?	No
Item Weight	22.7 g

Have a Question? See What Others Asked

anybody put this on 30 gallon steel buckets? the galvanized ones for storing animal food and such?

Is the flange at the base a standard size with a standard bolt pattern? If not, could I get the ID and OD dimensions?

Will this work for wet pickup? Will it separate water from the airflow using a high-flow (approximately 210 CFM) shop vac?

What is the size of the entry and exit ports?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

1914012₫

Duties & taxes incl.

Vietnamstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

Oneida Air Systems AXD001004 Standalone Anti-Static Cyclone Separator (The Dust Deputy DIY), Pack of 1

Description

Specifications

Have a Question? See What Others Asked

Common Questions