4 Pcs Splash Shield with Clips Splash Guards Fender Liner Shields Fit for 2003-2020 Toyota 4Runner, for 2007-2014 FJ Cruiser, for 2003-2009 GX 470,for 2010-2018 GX 460 Fender Liners-Thicker

So happy these fit on my GX470. I got a lift installed and the shop ripped out my stock fender liners. These were easy to install. There was some bend in the plastic after install so not a 100% fit but these will perform as needed and were a great replacement. As you will read from other comments, I also experienced breaking some fasteners when installing but there are extras in the bag provided. I also had some original stock left so it was not an issue.

Fit well and are good replacements. I would recommend

Look at how badly off they are. I get there needs to be a little play. But the holes are off by a solid 1.5 inch. The material is of harder plastic vs a rubbery material. The grommets slip right out. Literally. They also cut the left and right without rotating the material or having the machine. Cut it mirrored. So one side will have one face of the material face outside. The otherwise will have the underside facing out. Poor qa/qc and craftsmanship.

2008 FJ 4x4. Fit is off by a good margin. It’s almost like the design is for use with a 1” body lift. Lots of flappiness. I needed it covered so it’s installed as the OEM covers disintegrated. Will leave it until I get around to make something better.

Installing was easy, needed to turn wheel for both sides. Thin hard cheap plastic, it pretty much covered the side front bottom of engine from rain, water, debris, not a perfect fit but it works. I'm pretty sure when the mechanics need to get in there & remove it, the cheap plastic clips will definitely easily break off. 🤔

I have an 07 FJ Cruiser and these fit perfectly. I matched them up with the originals and they were a near perfect match but better not to mention being twice as thick as OEM. They are stiffer and less flimsy than the originals and "all" the holes lined up with no problem. A couple of the fasteners broke but I always have a few extras on hand so there was not problem there. Not sure what all the complaining is about, I know folks that have over 60 dollars invested in splash guards from other manufacturers and after their install, they don't look half as good as these. Would I buy them again? YES, I would, very satisfied.

Good

products looks really good but the tabs that came with it were really poor quality and 70 percent of them broke while installing since they were poorly made, so i had to tie them with zip-ties for now till i get some new ones. The factory once were still good even after 14 years. Also the shields didn’t even fit perfectly and it was bulged on both side since the holes weren’t probably made for my 2008 Lexus GX470. So make sure that it’ll fit you car even though it said that it’ll fit my car.