Jucoan 380 PCS M3 Male Female Nylon Hex Spacer Standoffs Screws Nuts Assortment Kit Threaded Pillar PCB Motherboard (Black)

I have a Gigabyte RTX 4090. The mounting bracket for the GPU has worked great for a year or so, but I recently did some more modding to my PC and inadvertently snapped one of the standoff mounting screws for the anti-sag bracket.The standoff style mounting screws for this video card are a little weird. Thankfully the standoff screws in this kit worked great and I was able to replace the broken standoff with one from this kit. It's working perfectly.

I found the Jucoan 380PCS M3 Male Female Nylon Hex Spacer Standoffs Screws Nuts Assortment Kit to be exactly as described online. This kit provides a good assortment of lengths and options (m/f, f/f, and end screws and nuts).This set of standoffs works well for me and I would expect for anyone who likes to use nylon material standoffs. As this was my first non-brass set, I found that I do not care for the light weight of the nylon standoffs. I typically am working to make my builds heavier (even with brass standoffs) so the single board computer or microcontroller does not go sliding across my workspace or doing flips every time I plug in a stiff cable.Thus, I do recommend these for anyone who needs a good set of M3 (what I purchased) nylon standoffs. They also work fine when I am able to use one of my 1/16 inch stainless steel project bases, as nylon vs. brass makes no difference at that point. However, I have not made that many bases (yet).Cheers.

Works well, even though I needed smaller length screws, they are nylon so I was able to cut the longer ones to the required size. Not real strong

Good value for money. Used to build a custom quad. Multiple crashes, and none of the bolts have sheered. Good quality material and no flashing is present on the bolts or nuts. Lighter weight compared to metal bolts so good to save weight (especially on a quad copter)

A LESSON LEARNED....METAL SCREWS ARE NOT THE ANSWER FOR A GOOD MOTHERBOARD INSTALLATION.THESE CLEARED UP A SHORTING PROBLEM AND WERE SOLID TO INSTALL. THE BOARD IS GROUNDED THROUGH THE POWER SUPPLY AND HEAT TRANSFER IS NOT A PROBLEM SOLVED BY METAL SCREWS. USE FANS IF YOU NEED COOLING.BE AWARE THERE ARE TWO TYPES OF SCREWS FOR MOST MB...THIS SIZE AND 6/32.....CHECK TO BE SURE WHAT YOU HAVE.

Has everything you'll need for a small project. Woukd help if the lid had a description chart to know the sizes.

The product is an excellent replacement for metal based bolts, nuts and risers for diy projects.

Cheap plastic, not sturdy, the thread is soft and gone after a few screw in and outs. I have use other plastic base screws so I expected them not to be near as good as the ones made of brass but the soft thread is a no go for me.

Came quickly and in nice packaging. These fit as described and do a great job when needing a non-metallic screw/nut to affix something - lots of extras for various jobs provided as well! Recommended.

Nothing to dislike except that some of the nuts were a little tight. Versatile for prototyping or one-off DIY projects. More specific ordering would be necessary for a production run.The nylon stan-offs can be made to adhere to the inside of a waterproof casing using epoxy to avoid penetration.

These standoffs are very wel made

Handy assortment of stand-offs of various styles and sizes Being made of plastic, there is no fear of shorting circuit traces as would be inherent with metal types.