Phrozen 3D Printer ABS-Like Matte Gray Resin,405nm DLP LCD UV-Curing Photopolymer Resin for General Modeling and Prototyping, High Precision Printing, Low Odor, Non-Brittle (1kg)

phrozen ABS resin for me is perfect to do test shots or for printing larger stuff like dioramas or structures.this thing just prints with zero problems and it does not deform, the parts are easy to connect.if you are new with this resin you will need to do calibration test just to be sure, also the manufacturer settings are a good starting point to do so

3d prints made with this resin remind of opera and the word masquerade comes to mind. If there was an environment with an underlying theme of earthy and silent, 3d prints made with this resin would belong in that area. Oddly enough, this resin reminds me of Geisha face cream, elegant and dainty yet fierce at the same time.

I bought his resin mainly because it was on sale. I printed a multitude of models with this resin and while i like it i do not love it. I posted several pictures of models i printed. The last 2 pictures show the same model front and back using this resin(left) and my favorite overall resin Voxelab(right). The models came of fine but what I do not like it the color. I prefer my resin to be a bit darker gray. It is a personal preference. I think the darker resins allow you to see detail a bit better. If it is on sale and i cannot find the Voxelab resin, then this is a good alternative.

I use it to print minis and it performs smoothly.

Printed my F16 TQS 3D model with this resin, using a Phrozen Sonic Mighty 4K, 2.5 seconds exposure time (according to my calibration prints, instructions provided by Phrozen). The rest of the setting is pretty much as provided according to the spreadsheet Phrozen published. Lychee slicers, 3.x.x. I set the least rotation angles to avoid large tearing area at once, then have Lychee auto generate supports for me. Reviewed the supports and added about 20 supports to areas I thought Lychee slacked off a bit (it would’ve worked, but I worried.).Note that with such a large raft…(a small part of the raft actually didn’t print out… out of the exposure area), FEP film failed miserably. The first layer didn’t even stick to the platform. I swapped it out with Phrozen’s PFA film, and it worked perfectly with exactly the same slicer file.Smaller prints, FEP film is not a problem, but if you want peace of mind, ditch the FEP. Don’t blame the resin. This is one of the easiest resins to print with, although I wish I had the white resin.And, yes, I did say “my F16 TQS 3D model”. I am the original author of that 3D model.

With the prices of resin pretty high and the price of TR250LV High Temp resin @ $50, I needed a new resin for my Phrozen Transform. I ordered the ASB-like Matte Gray resin and began printing. 3 weeks and 14 kg later, and I can say, "I love this resin." It prints well, sticks to the build plate and the color makes it easy to see detail. I just ordered 6 more kg.

I switched to using this stuff in my anycubic photon mono x with the same settings and went from about 50% failures to 100% success and the prints hold up better afterward as well.I've run about 7 full plates of stuff and I haven't had a bad part, yet. Best change I've made since I stopped using anycubic fep.

This resin is my go to for my printing business. It is a nice balance between detail and non-breakable.

Excelente resina