DLD Accessories Kit for Ecovacs Deebot N79 N79S DN620 DN621 DN622 Robot Vacuum Cleaner Replacement Parts Pack of Main Brush, Hepa Filter, Side Brush

The media could not be loaded.  I wanted a kit that came with two main brushes, but for the price this seemed to be the best option.I am very happy with my purchase.It took me about 10 minutes to change everything out. I have emptied and washed the blue storage compartment before, but this is the first time I have ever replaced anything on it and I have had my DEEBOT DN622 since Christmas 2018. So, with no prior knowledge... super easy.I changed the main brush with a small regular phillips head (positive) screwdriver. That was all i needed for the whole project. There is a blue cover on the main brush and the rubber connected to it still looks new so I didn't bother buying a kit to replace this. After removing the cover and pulling out the roll, there was some hair and debree that I wiped out of the cavity. This did require a little work because it looks like it may have run over something damp and sticky? (It was stuck to the walls. Only God knows.) There wasn't much but.. it came off easily when I put a damp cloth to it. I did a double take because the brush that came was a lot duller of a yellow and the bristles looked so small in comparison, but holding then side by side and comparing the moving parts it? They are good replacements. I was worried I might install the new brush incorrectly but ends are different sized squares which make installing it incorrectly pretty challenging. I replaced everything with no problems.The round sweepers were easy to click off with just my bare hands. Easy off and an back on again.I also replaced the air filter located at the top of the clear debree cartridge. I took out the paper white filter and the thin black foam filter/protector for it. Pretty straightforward replacement stuff. The other large plastic blue and white washable filter also located in the debree cartridge is still in great condition so I didn't bother replacing it.Before I flipped the machine back over I found that single the front wheel had a lot of hair in it. Upon further inspection I found that this front wheel does pop out and I used to screwdriver to unwedge the wheel. The only reason I felt the screwdriver was necessary was due to the amount of hair wrapped around it. I do wonder if the wheel ever needs replacing??I ran it for a while after purchase. It works better than ever. I love it. Great price for great products.

The sweepers are longer than the original ones which sweep up more and the black filter is thicker than the one that came with my vacuum. Very satisfied and will order again.

I wanted to do some maintenance on my deebot and ordered this package because it came with a roller, brushes and filters. At the same time I also purchased a new battery (irrelevant to this listing, but part of the story).Once I got it all, I replaced everything in my Deebot and that's when the trouble started. While vacuuming, specifically on carpet, the deebot would only run 5 to 10 minutes before it would error and start beeping four times (which is an indicator of a clogged basket).After many, many attempts of making sure everything was cleaned out (at one point I even blew the whole deebot out with my compressor)... Still the exact same result.I then proceeded to troubleshoot. First I swapped the battery back to the original thinking maybe it didn't have enough power...nope...not it. Then I noticed if I pull the basket completely out, the deebot would run fine. Thinking maybe the filters that came with this kit were not allowing enough air flow, I temporarily removed them...nope..same problem. I proceeded to test every individual component in the basket: only the screen (not included in this listing, only the black foam, only the air filters....nope ...still error.So I could only conclude, that the fan motor must have coincidentally gotten too weak. So I proceeded to tear my debot apart, and replace the vacuum fan. Pretty sure I had finally licked the issue, I sent the deebot on its way only to find...nope... Within 5 minutes, error.This time when I went to pull the basket, I noticed there was something stuck in with the roller... Ah good I thought... Pull that out, sent the deebot back on its way...nope!And that's when it hit me... With all my testing, and all my replacement parts, the one thing that I hadn't swamped back to original was the roller brush in this kit.Pull that out, put the original one back in... And so far it's been running 20 minutes with no issues!So this review isn't as much as saying this listing isn't worth it, or it's junk, it's just a warn people if they do replace the components and their debot starts to act up (erroring out and beeping while vacuuming) You may want to try swapping out the brush roller with your old one (goes without saying, KEEP YOUR OLD PARTS)

I found this pack great value compared to buying all the components I needed separately. The paper filters even come with the little piece of black foam which goes underneath. Plenty here to keep my Eufy going. The components fit just like the original ones which were on the machine. Make sure you get the right one for your vac, this is for the 11, which is the basic version of the Eufy.Ordered this to ship internationally and it only cost USD 5 in shipping to Asia. Took around two weeks to arrive but that's to be expected.

Update: I received a replacement set promptly that was exactly what I hoped for.I was not looking for much at this price, but the filters were falling apart and one was obviously used. The main brush had black hair (not bristles, long and thin black hair) wrapped around it. The little brushes also had some black hair. One of the black filters was dirty.

Very disappointed with this kit. It was very easy to switch out with the old parts. Unfortunately, within 15 minutes of the first use the side brushes were tangled and knotted. In addition the vacuum now stops or gets stuck almost evertime it bumps anything. I'm going to have take the new parts off and put the old ones back on.Update - After putting the old parts back on the vacuum is running with no problems.