Mars Gaming MCX, ATX PC Case, Tempered Glass, DUAL RGB Fan, White

Look I am not saying this case is the best case out there. I'm not even saying it is particularly good to look at but at the time I bought it, it was the cheapest case I could find on Amazon.However don't let that put you off.I was after a budget build so this fitted the bill perfectly. It came with all you would expect in the way of screws and cables to connect to an ATX motherboard which is precisely what I did. I also added a small 80mm fan on the rear to plug into the chassis fan on the motherboard. The two LED fans on the front are decent and give good airflow.I had no issues with installation as everything fitted well. Only odd part was mounting the SSD's to the base of the case but not a real issue.also with a decent Perspex side you have to get your cabling tidy (which you can see I failed). I was using a 5600G processor with onboard graphics so didn't install a dedicated GPU. If I do it would have limitations to length as the case is small - there are some that would fit but I may have to change the case at that point. Also the tall cooler I chose didn't fit so a lower profile one will be needed - I went with the stock cooler in the end as I am not over clocking at this stage.overall a good starter case for the budget builder.

This case was much, much smaller than I was expecting.I intended to mount the Hard drive & ssd at the bottom of case but simply there wasn't enough room to mount a graphics card, talking of which I was planning to use an rx580 but it was too long so I've had to a zotac 1660 super mini.I was planning to have two fans installed I have removed the top one to make room for the hard drive & Ssd.The air flow is terrible, currently having to run it on its side as the non existent feet mean no air can entry from the bottom.The case looks nice but it made from the finest Chinese pressed tin, no cable management room in the side panel.Please buy something else.

I recently upgraded my gaming rig with the MARSGAMING MCX ATX PC Gaming Case in white, and I'm thrilled with the results. This case strikes the perfect balance between style and functionality, making it a standout choice for any gaming setup.First off, let's talk about aesthetics. The tempered glass panel on the side provides a clear view of the interior components, allowing me to showcase my hardware in all its glory. The white exterior with subtle RGB lighting accents adds a touch of sophistication to my desk, making it a visually appealing centerpiece.But the MARSGAMING MCX isn't just about looks—it's packed with features designed to enhance the gaming experience. The dual RGB fans not only keep my system cool during intense gaming sessions but also add a dynamic flair with customizable lighting effects. I love being able to personalize the lighting to match my mood or game aesthetic using the included remote control.In terms of functionality, this case ticks all the boxes. The spacious interior provides ample room for high-performance components, including large graphics cards and liquid cooling systems. Cable management is a breeze thanks to strategically placed routing channels and ample tie-down points, keeping my build clean and tidy.I also appreciate the thoughtful design details, such as the easily removable dust filters and tool-less installation mechanisms. These small touches make maintenance and upgrades hassle-free, saving me time and effort in the long run.Moreover, the build quality is top-notch. The sturdy construction and attention to detail instill confidence that my components are well-protected and secure. Despite its compact size, the case feels robust and durable, capable of withstanding the rigors of regular use.Overall, I couldn't be happier with my decision to choose the MARSGAMING MCX ATX PC Gaming Case. It's stylish, functional, and packed with features that cater to the needs of gamers and PC enthusiasts alike. Whether you're building a new rig or upgrading an existing one, this case offers the perfect blend of form and function. Highly recommended!

Summary: Good value and very compact, beware of GPU size and be prepared to properly cable manage, not recommended for first time/new builders.The case is small, but that is a benefit for some and why I brought it. Obviously cheap materials but it is also cheap so you can't really moan.Cable management is challenging on a non-modular PSU but with some zip-ties and patience perfectly doable. On that note I wouldn't recommend this case if you have never built a PC before because of the internal space limitations, double and triple check your GPU dimensions to ensure it will actually fit... Or just get a bigger case.I replaced the stock case fans with some better ones with a simple control hub with remote control, for that extra 10-15% RGB performance bonus after downloading more ram.All in all can not fault it for the money, some non molex fans would be a welcome upgrade and is realistically expected in 2024.4/5

This is a very compact case, I’ve worked on bigger ITX cases than this! Photo shows it compared to an old Antec case as an example.You can use mATX boards but there’s very little room.Your graphics card choice though, that you need to be careful with. I went with a Costco 1660s that’s pretty small and low powered. Fits fine. But a 2070 I tried? No chance.The case itself is made of very thin metal, it’s super light and flexible. You push too hard it’s gonna bend. And these panel? It’s thin Perspex that will deform and crack easily if you are not careful.The front light bar looks quite nice and a button on the front gives a good selection of colour schemes. The 8cm fan is fixed rpm and fixed colour.Cable management is…. Not the best. There’s some space behind the board for flat cables but it’s limited.Bottom line is it’s a cheap case, really cheap. It looks ok but when you work on the case you know you are working on a cheap case. The finished product looks ok though. Three stars from me.