UDPATIO Outdoor Storage Shed 10x10 FT, Outside Sheds & Outdoor Storage Metal Galvanized Steel Yard, Patio, Lawn, Tool Shed with Lockable Door for Can, Bike, Lawnmower, Generator,Dark Grey

5 stars for sure! Takes a bit to put it together but well worth it. The cost is super low for this shed, we are extremely happy. It fits the lawnmower, weed Wacker, shovels, a small table, pruning tools, a small bbq, some holiday decorations, and a few other things. Putting a small table in it was helpful for stacking so a small shelf system would hold even more. I'd buy this again. Might even buy two more for my patio and back yard.

Quick shipping and well packaged. Wish the instructions were in English but pictures made sense to easily build. Take your time and wear gloves.

I will be honest I struggled with the star rating. As so many mentioned this product came with several bent pieces due to light weight material. It does come with cement screws and set up we believe it will be sturdy enough. We are blessed that my husband at one point in his military career was a machinist and thus able to remedy rather than waste our time returning. We ordered two (full disclosure this rating is based on the only one we have opened at this time; I will update if there is anything that changes after opening the other one). Holes were a bit off in some spots but really not a huge issue with an electric screwdriver. Definitely invest in caulking to prevent leaks. Definitely there are parts of construction that you need two people. It is very heavy on arrival and will also need two to move it around safely. The biggest issue I see for many ordering in the USA, like us, is that the instructions were in German. This may simply have been a mix up, but I think worth noting. Ironically another area we are blessed as hubby and I speak and read German. That said we are not sure there is going to be that many in the USA who speak that language. We even laughed that it did not occur to us until we were about halfway through. Even in a language we understand the instructions were not completely clear so read them carefully and have a clear understanding before starting to build. There are some parts that look alike but truly are not. Everything is clearly labeled what part it is though. We do really like these for the price, thus still giving good stars. Just cannot do five since not perfect :)

UPDATE:If you're buying this for the size... Don't. It is NOT 5' x 3'! It about 6" short of 5'... And 4" of 3'. I bought this to accommodate shelving that I bought... The shelving isn't even close fitting>:-/Started out really impressed with this. Was totally thinking a 4 or 5 star project. If I could, I would send it back. Due to help and weather delays, finally got this out up today. It took us 8.5 hrs... 1 hour for the base and walls... 7.5 hrs for the roof and hinges/hasp. Tried uploading photos, but the site won't let me. Here's the thing...Pros:- I have no idea what people are talking about re "flimsy" feeling. This is actually quite solid.- Everything was almost perfect re lining up with all the holes on the sides and base... Minimal fussing.- Door frame is very sturdy.Cons:- The roof is a joke.- The side arms are not the same material as the rest of the shed, nor is the front panel above the door, across the front. These are actually quite flimsy.- NONE of the screw holes line up on either arm! If I line them up, the arms extend past the roof edge, and the roof panels do not fit.- The side arms of the roof are essentially attached with a single screw, because that was as many as I could get to work on either side.- The side arms can be simply pushed out... Or in. Pick one! They don't stay in place because, as stated above, nothing lines up.- The side arms are warped/buckled.- The left side arm was bent and "creased" and WILL allow rain in.- The screws for the roof don't tighten down... EVER! And are lifting as we speak because of the way I had to force them to screw in, which ended up tearing the screw holes on the roof panels.- There are holes with nothing to attach to them around the sides and corners... As in support points!- There are screw holes in the roof panels that are NO WHERE NEAR any support to attach them to!- Door frame is very sturdy...HOWEVER... Can't get the screws to go in to attach the hinges and hasp...- Parts were rusted.- The base has what appears to be a faux galvanized steel finish chipping off.- The entire shed is basically shrink wrapped in saran wrap... As in each piece individually, completely wrapped. It's all scratched up and peeling, which means it looks like hell, unless I want to spend more hours trying to peel it all off! There has to be a better way than this to protect the finish!Remedies:- Entire roof will need to be caulked to keep water out. Period.- I figure gorilla glue might be able to hold the side arms in place, but not sure.- Flex Tape for all the larger hole areas, as well as the holes in the roof panels with no where to attach anything to.- Going to try some self-tapping screws to see if that fixes the issue with the hinges /hasp. Maybe on the side arms as well... Don't know if I'll have enough room at this point.- Need screening inside of the vents on the side arms, otherwise you will have wasps, etc, flying in and nesting.In summation...- It looks good.- It will definitely hold what I need.- However, I definitely recommend looking elsewhere for a shed... I've bought and put metal sheds together before... Not my first rodeo.- The fact that I can't secure the roof is absolutely insane...- And I should not have to spend more money, and waste more of my time to fix what they should have fixed before it left the manufacturer.

Built very well and it all fit together as planned. This is a very sturdy unit and I was so happy that 2 weeks later I purchased another one. You will not be disappointed with this product!!!!!

We ordered the 8x10 resin shed. It came in four boxes. Upon opening, there was a paper inside that said it would take 4 people 8 hours to assemble. It is a rather complicated assembly and comes in a million parts. I can't attest to the quality yet as it is still not totally assembled but fair warning, this particular size and brand is in no way easy to assemble and had i known it was this difficult and time consuming I would have chosen a different product. I will say however that all one million pieces seem to be there, so the 3 stars are for that alone.

This is my Xmas shed. Enough fit. Normal time to assemble. Outcome worth the price. Would highly recommend. We sealed before using.

Very time consuming to put together, but the instructions are pretty easy to follow. Very important to know- if one thing is off slightly it will impact the final result overall. (Doors will be misaligned etc) You definitely need 2 people. Once finished and the first rainfall, it leaked in several places.. will need to caulk the resin pieces. It’s an alright shed for the price point.