Cuisinart1.7-Liter Stainless Steel Cordless Electric Kettle with 6 Preset Temperatures (Brushed Graphite Gray)

Best kitchen appliance purchased. Got tired boiling water in a sauce pan or microwave. Best thing is the selection of the temperature of the water you desire. The speed to heat up boggles the mind. Construction is metal and sturdy

Idk how it started, but I seem to have a "thing" for kettles, and have more than I'd care to admit. As each of my kids leaves home, the first thing they'd take was one of my kettles. They use them to make coffee, tea, mashed potatoes, and ramen noodles in their dorm. I love cooking and canning, and have found so many uses for this kettle. It's nice to look at, easy to use....even in the dark, and cuts time and valuable prep space when canning. Also great at sterilizing utensils and jars. I like the weight of it....doesn't feel flimsy or will easily tip over like other kettles when the cord gets bent/twisted. The "keep warm" feature is convenient too. Bottom line, this is my new favorite kettle due to it's size and different temp settings for making various tea blends. If you're on a budget and only need it to boil water, this would be an overkill, IMO. Lots of much cheaper alternatives on here for that. However, if you find the temp and keep warm options helpful, this is a solid piece of equipment I highly recommend.

We bought this water boiler five years ago and just threw it out today. That's a pretty decent run considering we used it multiple times per day. I like the different temperature settings, and it heats up water pretty quickly. The only major negatives other than it breaking after five years or that the bottom ended up getting stained pretty quickly, and I'm not really sure why because I only used water in it

This kettle is everything you could want! I use it mostly for french press coffee, but my guests have used it for various kinds of tea, instant oatmeal, or hot chocolate with great success.I did a lot of research on these kettles, and I found that the one thing to avoid was kettles with plastic insides. Every single one with plastic innards had comments about plastic taste in the water. Stainless and glass interiors didn't have this problem, but glass was more susceptable to scale buildup. So I went with stainless. There aren't many of these kettles with stainless insides, and the ones there are are generally more expensive. I looked at the Breville and some others, but they were simply too much money. This one, while not cheap, offered a great feature set, accurate temperatures, stainless interior, good controls, unobstrusive base, and pretty nice aesthetics.The kettle is easy to fill, solidly built, and heats water very fast. It finishes its heat cycle with an authoritative BEEP that I can hear from the next room as I watch Sports Center. Another bonus is that even once it has reached temperature, it will keep the water at that temperature for up to 30 minutes, so if I'm busy doing something else, my kettle can wait until I get there, and my water isn't too cold or too hot! The most important thing about a good cup of french press coffee, besides the beans, is the temperature of the water.The base is very minimal and you don't even notice it when the kettle is sitting on it, it looks like one piece of the kettle. The controls are easy to reach while holding the kettle by the handle, and the little LED light on the water level indicator is bright and helps you see the water level in a dimly lit early morning kitchen. It also automatically shuts off after a bit if the kettle heat has been turned off. The kettle will turn off automatically after a certain amount of time, but it also is easy to turn off once you've poured out your needed water by pressing the "keep warm" button again.Cleaning is as easy as making a water/white vinegar mixture and letting the kettle boil for 10-15 minutes, then rinsing it out a few times. This removes lime scale deposits and calcification.For the build quality, looks, features, and performance, I can't rate this kettle high enough! Look no further!

After reading reviews and comparing products we decided on this unit largely due to the 2 minute setting memory feature when the pot is removed, and that it defaults to the Keep Warm cycle automatically. Typically either myself or my wife will get up an hour or so before the other and wanted to have the pot ready for the other.I had concerns about comments that because of the size and curve of the handle that it was more difficult to lift and pour compared to some others. My wife has very small, almost child sized hands and not a lot of hand strength. Neither my wife or I had any difficulty and find it entirely comfortable to hold and control the pour. It seems to me the width of the handle may allow for a meatier grip and less likely to slide in the hand than some others.I also had concerns about the lettering coming off as reported in reviews, which was an easy fix which I describe in detail below.This is the first kettle we've had so I can't speak from much experience, but according to reviews this heats up as fast or slightly faster than most others. I think this is largely a factor of the wattage rating of the heater element and little else. In any case it is faster than a stove or low power microwave. We have a small under counter microwave, but I suspect a single cup in a high power microwave may be equally fast if not faster than heating up a similar or larger amount in the kettle. Obviously the more water there is in the kettle the longer it takes to heat. However, I suspect larger volumes would be faster in the kettle compared to a large volume in a high power microwave. Either way the kettle allows you to use the microwave for other cooking and collectively work more efficiently to save time.There seems to be only a few seconds difference between heating times of competing models of the same wattage which seems pretty obvious to expect, and largely irrelevant. However, one factor I didn't expect with this product that could affect this; lack of insulation. The more insulation, the faster it's likely to heat, the longer it would stay at temperature and the less energy it would use to stay hot. For some reason I expected this to be a dual wall insulated pitcher - it is not! This is single wall stainless steel which is quick to conduct heat. This has five negative consequences; the two I just mentioned, and; it gets hot to the touch; it is comparatively noisy; and it's a little room heater in summer, though that may be an advantage in winter. While I didn't find the noise really any worse than boiling water in a pot on the stove, it is noticeable in the room. I would expect a double wall product would be quieter if that's important to you. A quick touch of the pot at the maximum temperature did not leave a burn, but it was painfully uncomfortable and I wouldn't want to inadvertently use my other hand to hold the side to support the weight while pouring... I expect that could leave a mark.The pot sounds a single beep with each button press, selecting temp, start and/or turning off keep warm, and three beeps when the heat cycle is complete. They're clearly audible but I would not characterize them as loud. I believe I saw a link in these reviews for instructions, that are not in the product manual, to turn that off if it bothers you. It's a non-issue for us.I find it's easy to clean and it's possible to fit my average man sized hand in to scrub mineral buildup from the bottom. Stainless is easy to wipe clean, durable and scratch resistant compared to plastics, though prone to finger prints and smudges as it typical of any stainless appliance.I like being able to easily open the lid in hand, with one hand, after lifting the pitcher off the base -not possible with some competing products.Be careful positioning this under cabinets. This, probably like most other kettles, emits a significant amount of steam. While it wasn't initially obvious, the underside of our wood cabinets was soaking wet and literally dripping. This would result in significant damage to your cabinets over time, particularly if like most, your cabinets are made of particle board as is required by Code in many areas. Ensure it sits away from upper cabinets!We've not had this long enough to require service, but from previous experience with Cuisinart I would agree with comments regarding their warranty support; essentially 'customer no support'. If it breaks, return to seller in 30 days or buy another IMO. Cuisinart Support is not good and I wouldn't buy anything from them or any similar 'no-support company if you can avoid it or unless you have a compelling reason.According to other reviews there may be reliability/"safety" issues with this model, but speaking generally, keep in mind that people often over exaggerate and suggest bursting into flames, electrical fires and other such nonsense with electrical products. This simply isn't the case 99.9999% of the time. Where there's smoke, there is rarely fire. This is the nature of all electrical or electronic devices. Components may overheat, smoke and blacken, melt, etc. but rarely if ever get hot enough to result in an open flame. Typically the process of overheating results in the component failing entirely and breaking the circuit and it simply stops working. With that said, any product with a heating element which fails in a constant on state, such as this product, is a concern and may result in damage to the device or the surrounding area such as counters or cabinets. This unit has had issues reported so buyer beware. Place in your kitchen accordingly. If your counters are wood or plastic resin or even stone, consider a trivot or piece of tile under it. I don't believe this is a common occurrence, but the issue with this not shutting off shouldn't happen unless corners are being cut. Decide if you're willing to tolerate their support, but also consider if the 'other' product you would consider would be any different. I've had the same poor support, coverage avoidance, hidden disclaimers or limited coverage, charging substantially for shipping to and or from the manufacturer, hidden handling fees, etc from many of the top appliance companies too. For something you'll probably use multiple times a day, possibly your most used appliance, is ~$70 really that much, or to consider disposable even if it only lasts a year or so? I don't think so, but opinions will vary.Button Lettering: I have seen many high end products which have their lettering simply painted or decaled on. Universally you can expect this to wear off in a short time or stripped off entirely from various cleaning products. This certainly applies to this product as well. Usually you can mitigate this by simply spraying several coats of clear coat urethane over it. I use/used Behlen Master Jet Spray Lacquer Finish clear satin for most applications but you may want to consider a gloss product depending on the item's finish. Satin seemed to be the perfect match for this product and resulted in an undetectable factory new appearance. Other products may work equally well of course. This took less than 10 minutes to do. Be aware this may void your warranty if discovered.Steps:1) Use painter's masking tape to mask off the buttons. 2" worked well. Put a strip of tape parallel to the handle right down the middle over the lid open and button panels.2) Press the tape down and work you fingernail or small object around the perimeter of the panels to define the gap between the buttons and the frame of the handle. Reposition the tape as needed. Make sure there are no wrinkles around the panels and that the tape is essentially flat against the handle.3) Use a razor blade or similar knife to trace the gap around the panel and remove the tape over the panels. You can use the gap created by the buttons themselves and carefully, with less pressure on the knife over the plastic connector portions of the trim insert frame, and try to just cut through the tape but not into the plastic. I doubt you'll ever notice a small scratch if that happens particularly after it's clear coated.4) I used a small trash bag to cover the pot from overspay and roughly cut a small hole a little larger than the combined button panels, but this could be accomplished with news paper or other materials too.5) Put the pot in the bag and center the hole in the bag over the button panel.6) Use more masking tape to roughly tape around the hole and over the tape you've cut on the handle to mask the panel. You're only trying to seal the gap between the bag or paper and the masking on the handle. Press down firmly and smooth out any wrinkles. Make sure there are no gaps that could leak spray on the rest of the pot.7) Find a clean, non-dusty, temperature controlled area to paint and cover the surrounding area from overspray if necessary.8) Shake can well and perform a quick test spray on paper. Ensure there is an even spray with no droplets, spitting or dripping. If the spray is not sufficient quality you may want to get another can. Follow the directions on the can for application and drying time.9) Wipe any excess from the nozzle before starting. A paper towel or rag should do it. Any excess may result in spitting that could leave an uneven finish.10) Position the pot and holding the can back 12-24", spray a quick fine mist over the buttons and allow to dry. I let dry for about 10-20 minutes or so but just moved on to something else for a bit between coats. Behlen dries quickly but your product may vary.11) Wash and dry your hands. With a finger, gently touch the overspray on the masking to ensure it's dry. You can then carefully and gently swipe your finger over the buttons to feel for any irregularities you might want to address before adding coats. If it was not dry and your test swipe left paint on your finger, allow to dry further and wash your finger. Do not swipe over the buttons if it's still wet or you have residue on your finger. WD40 followed by isopropyl alcohol, to remove its residue, can typically be used to remove the lacquer safely, that has not been fully allowed to dry and cure, with less risk of stripping the lettering off than using thinners or other solvents. Usually a little on a paper towel or soft cloth and gently wipe will do it. I did not try that specifically on this product so perform at your own risk. I have done this in other situations successfully. It's better to take your time and get it right the first time than try to fix a poor finish later...or just live with it.12) Use only very light coats and avoid sags or drips. You can recoat or build a couple light coats at the same time to control the texture and sheen to match the appliance. Heavier coats for a smoother gloss appearance, a finer mist for a more textured matte appearance. Finer coats are less likely to result in blemishes. Thicker coats are more prone to dripping and will also need more drying time between recoats.13) Let dry and repeat. I used 4 moderate coats, with the first only a light mist to create a bond layer for the other coats to stick to. More or less may suit your purposes.14) Let the last coat dry overnight or otherwise as recommended on the can.15) Remove the masking tape, clean off any tape residue and enjoy. Chances are you won't even know the clear coat is there.I would still avoid excessive wear if you have calloused hands, long fingernails, etc. Some have suggested only pressing on the corners of the buttons and not on the lettering itself. This should seamlessly eliminate the issue entirely for most use and avoid unsightly use of clear tape and other such recommendations offered in these reviews. If you don't care about that, clear tape may work just as well for you and be easier. If you start seeing some wear, it's easy enough to recoat before there's significant damage.I've detailed this so inexperience people should be able to successfully do this even if they've never spray painted before, but obviously some experience may improve results. Overall this is very simple and it may sound more complicated than it is. Drying time aside the masking IMO is really the only challenging part if you can call it that, and it shouldn't take more than 5-10 minutes to do if you have the supplies on hand. While one 'could' spray over the buttons and handle and just mask off the pot to make it easier, I wouldn't recommend it if maintaining the warranty or cosmetics is a concern.In hind sight I find the biggest detractor with the product to be the lack of insulation on the pitcher. Had I realized that before purchase I might have reconsidered the decision. There are some other good competing products that heat just as fast that use double wall construction, but, may be lacking some features or ease of use of this one. I also wish that it had a real time temperature reading so you might know when it's 'close enough' rather than wait for it to reach full temperature. That said I'm happy enough with the product and it otherwise meets our needs just fine.Cheers