Movo GB-U80T Underwater Diving Rig with Cold Shoe Mounts, Strap - Compatible with GoPro Hero, HERO6, HERO7, HERO8, HERO9, HERO10, HERO11, Osmo Action - Scuba GoPro Accessory (XL/Tangerine)

The media could not be loaded. This thing is machined from a solid aluminum billet. Meaning it's one solid piece of aluminum with no seams or bolt together construction. It looks like it's been brushed or peened to a very nice matte finish. It has several 1/4" and 3/8" mounting holes all over it and two cold shoe mounts with stops.My only "complaint", and it's not MOVO's fault, is in mounting a GoPro with the Media Mod installed. (please note the Media Mod from GoPro is not waterproof). The GoPro screws you would normally use are just too big on the thumb end and cause your camera to tighten down all angled from the mount.However, if you want a solid, easy to get on-track handling system...simply buy a replacement screw for the GoPro mounting. A package of three Stainless Steel bolts plus nylon washers costs about $2.00 from any hardware store, M5-.80 x 20 is the bolt\thread size. See picture...You only need one of each, but like NASA it's nice to have a spare :)Hey bottom line...this thing is a tank and feels very nice in the hand. Buy it, you'll love it. I suspect without the Media Mod and your GoPro watertight...this would be a huge blessing for video control while diving. But that's another storyline.Seriously, this one is winner!I bought this mount myself, MOVO had zero to do with this review. It's just a good piece of equipment, well done.

This camera tray is amazing. I was very skeptical when I purchased it if I would like the style and size. I got the bigger version, and it is the perfect size. I installed a few stainless steel eyebolts into the 1/4-20 threaded holes to attach bolt snaps to, and this worked very well. I have a few dozen dives with this and I couldn’t be happier. It handles my GoPro with plenty of room for my hands, and I have locations to add lights in the future. It is extremely light, but very very solid. It’s made from 3 pieces of cast aluminum bolted together under the yellow handle guards, and this makes for a very solid and stable platform. Absolutely NO wobble or slop in the unit.The one issue I have found is only cosmetic. The yellow handles cover the bolt locations on the handles, and these locations are covered by small yellow tabs that simply serve to cover the holes. These tabs do not stay in place and I lost both tabs on my first dive. I don’t know why they included these tabs at all, but I don’t miss them and it doesn’t impede the function of the product at all in any way. It simply is cosmetic. I would give the product a 98% grade, rounded to a 10/10

Great small cage. I purchased for use of my GoPro Hero7, while diving. The reviews on this product really helped guide me in the direction I wanted to. So let's break this down for future buyers.We will start with the one big flaw. Size. It's a little to short IMO to use the shutter button with the supersuit equipped. It's also maybe a little to narrow to get a solid grip around the handle without pushing the camera around. As others within these reviews have done, I overcame these issues by adding and arm to the base of the camera. I will tell you though, I absolutely love the compact size while diving. It's not to large that it's over burdening or clumsy while diving. 1 inch taller, 2 inches wider I would have given 5 stars.Weight. Its heavy enough to where it feels like a very solid unit. Not so much it has thrown my buoyancy off. And obviously its negatively buoyant.I havent seen any signs of the rust thus far on the screw as mentioned in other reviews. I have completed 2 saltwater dives off a boat with it going straight into clea fresh water each time and a final soak and rinse when I got home.The finish is nice and all the edges are rounded. No issues with any of the threaded holes as of yet. The cold shoe receivers fit snug. And the lanyard holes are great. The lanyard that is comes with is poor quality, but I had no intention of using it when I made the purchase anyways.The GoPro tripod mount that it comes with does the job but its plastic, which i find odd when you are order an aluminum setup. I plan on replacing it with an aluminum which are a bit shorter and may remove the need for the arm. I'll update if it corrects the shortfalls.All in all, a great budget friendly diving cage. The guys at the dive shop were impressed.

This grip is great, little small but works like a charm..lots of attachment points (cold shoes, 1/4-20 threads, cutouts for ropes)When camera is squared up with the arm there is a problem to push the shutter button, but I tilted my camera and lights forward and all works awesome.https://www.amazon.com/gp/product/B0734772HY/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1Here is a photo of my underwater rig, all parts bought here in Amazon.Lights work great pretty, bright, battery lasts at least 1.5h. If you have a GoPro 3 you have spares. I had them on 30ft without any leakage.https://www.amazon.com/gp/product/B07BCC4VQW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1Light cold shoes mounts - all aluminum, sturdy well made. Don't get the plastic ones, they fell apart very second I tried to attach them to the grip.https://www.amazon.com/gp/product/B0183JT776/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1Off brand GoPro housing came with 3 filters for different types of water. Good case no leaks, not as polished as GoPro case, but for half the price with filters, no brainer, and you don't have to take of the GoPro lens cover while putting the camera in the case.https://www.amazon.com/FitStill-Waterproof-Protective-Anti-Fog-Accessories/dp/B07Q3514X6/ref=sr_1_20?keywords=gopro+dive+housing+with+filters&qid=1564761881&s=gateway&sr=8-20Lynyrd - safely attaches your camera rig to BCD, good quality, no worries that your rig will float away when you let go by mistake.https://www.amazon.com/gp/product/B00PVQQQGA/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1