Grand Patio Outdoor Swivel Dining Chairs Set of 2, 360 Degree Mesh Sling Rocker Sets for Deck, Garden Backyard, Mixed Coffee

Nice chairs; not too hard to put together.

Nice chairs for the price. I would also recommend that you either put all the little screws, nuts, etc. in little cups and label the cups or mark the back of the vacuum seal packaging with the corresponding letter to avoid mix up. You will need your own metric allen wrench and socket wrench to tighten screw as the wrenches supplied are not easy to use. Chairs are comfortable and sturdy. They rock a bit and swivel.

Nice sturdy chairs. Went together ok. Only had one hole that didn’t line up well but made it work. Directions not good at all. Thank goodness for the pictures. The only thing I am a little unhappy about is that on the underside of the base there are little round glides . A couple of those are missing. Not a big issue since you can’t see that when they are upright but still…..

We have both small and large adults (145lbs-275lbs) in our family, and everyone comments on the chair's comfort. Not the easiest to put together, (and my husband has assembled at least 30 different furnishings over the years), but worth the time. Easy to swivel, only rock back a tiny bit, but enough that they're comfy. Beware, they are "Very Heavy", and the circular base can squash toes! We are in S.Fla, and have to drag them in for hurricanes. I might have reconsidered if I'd noticed the weight, but the comfort is worth it. We've had them for 14 months, and they get "lots" of sun and rain, but they still look like new. I will update when we need to replace them, hopefully several years from now! Great chairs!

Very nice chairs. Took my husband about a hr to put them both together, nice pattern. Comfortable.

This is one of the easiest put together chairs you will ever find. The only secret is don’t tighten any of the chair screws until they all are all started. There may not be any instructions, but there are pictures and they are easy to follow along. I have tried many other chairs like this in the past. They are very difficult. If not next to impossible to put together. Usually the holes don’t line up they’re missing parts. Not in this case this is an outstanding manufactured chair. I weighed 330 pounds. This chair is rated for 400. It is great he won’t be sorry you purchase one. I don’t normally give reviews that I couldn’t help in this case.

These chairs are a bargain at $120 each for 4, they are comfortable and swivel with a good bearing, and have a good well engineered design with quality hardware. Some basic assembly skills are required to assemble them, and a battery impact driver with a 5/32 hex bit, a 10mm socket, and a 13 mm socket will really speed things up. While the assembly is simple with good instructions on one page, and the parts are well marked, you might as well figure an hour to assemble two of these. After the first two it only took me ten minutes to assemble the next two. Assembly is basically three steps, two bolts to bolt the back together after you unfold it, bolting the arm on each side, and bolting the base bracket on the bottom, it could seem confusing to someone who has never assembled anything.

I like the color, but I find they sit easier with cushions.In the process of assembling this I needed a 1/2" socket, an m4 Allen socket diver, a 1/2" ratchet wrench, and a six pack of swear words.However, Prime Day pricing...