Michigan Motorsports 9005 9006 Universal fit 2-Way Splitter Wires for The Headlight Head lamp retrofit 12"

Retrofitted my headlights on my 4th gen 4runner to a bi-xenon. I still wasnted to get the extra light from the high beams to a purchased this to be able to use the OEM harness with both the beams in the front. They work!

Not completely weather pack, no seals on back shell, but the do a fine job for my desert truck to add LED light barsEdit: they do have seals, pretty well done and time will tell on longevity since they are a bit soft rubber. I bought more for other projects 👍

Thank You Very Much!!!

Worked as described, the connectors are of a good quality. Usually the clips that secure the connector break off or are brittle, these are pretty sturdy.

Sooo, I ordered assuming these will fit BOTH 9005 and 9006 as universal connectors. I double checked the wording on the listing, and is it not clear that one will not fit but the other one will. So if you WANT to split say both of your high beams, you will need (2) kits or another product that sells them as an actual matched set. The difference is in that female plug that you will plug into your original source under the hood.

Prefect. Does exactly what it is suppose to. It is longer than what the picture shows but it works very well.

I used it as a splitter on the high beam wire in my 2003 540i for aftermarket bi-xenon projectors, for that it works perfectly.However, it has one 9005 output and one 9006 output and this was not mentioned in the description. If you plan on using it to run two 9005 or two 9006 bulbs it will not work.

Got the job done. Ran it to send on/off to a lightbar installed when hi beams were used