Rollerhouse 12V DIY Electric Roller Blind/Shade Tubular Motor Kit, Hard Wired 12V DC Motors 2 Wire Motor ES2512 for RV Electric Roller Shade, 1.5 inch Roller Pipe

Il serait intéressant d’avoir des embouts avec plus d’encoche pour la prise dans le rouleau de la toile en métal.

Works great easy install

This was used to create a retrofit/DIY automated rollershade. The roller works well and is quiet. There is a short beep (not too loud) when the roller is activated. The roller has stop and start positions that can be programmed. These seems to come with a pre-set default roll distance of about 12", so you'll need to reset that - don't assume its defective if it only rolls a short distance. There are no brackets included, you will need to purchase those to mount this. The motor has a 7mm slot in it to mount on a bracket, but most brackets, including the ones from Rollerhouse on Amazon are 10mm (so -1/2 star :-). You can use a Dremel to cut down the bracket to fit into the rollerhead if all you can find are the 10mm brackets.The rollerhouse support team was very helpful determining the motor size for my application. They even helped me locate the correct brackets. When I create another set of automated shades, I'll use this again.

I have purchased three of these roller motors and am very satisfied with them. For those that gave it a one star rating because it only moved about 12", you need to read the directions. These rollers have pre-programmed up and down limits, and the default "down" limit is set somewhere around 12". It was very simple to program them for the correct down limit for my shades.These motors operate on 12-volts DC and a simple DPDT switch controls their direction. I bought these so I could use the switches already in the control panel in our motor home to operate them. I did not want to keep track of yet another remote just for these blinds.Customer service is excellent as well. I had a problem with one order (wrong size roller inserts on the motor) and that was fixed with ONE email to Helen in customer service.

Llegó mucho antes de los esperado y viene con todos los accesorios necesarios para su operación en una persiana ya instalada. El motor tiene un circuito interno que ya tiene una velocidad regulada (no es necesario programar un PWM) y se puede programar con un botón en mismo motor para fijar el límite superior y el limite inferior de la persiana.