Fabbay 20 Pieces Basswood Sheets Thin Wood Sheets Craft Wood Board Unfinished Plywood for Craft DIY Wooden Plate Model Wooden House Aircraft Ship Boat School Projects (12 x 8 x 116 hes),TT0706

All twenty boards are beautiful and blemish-free on both sides, perfect! They are laser-cut and there were a couple of tiny darkened spots on some board faces, 400 grit took them right off though. They were also warp-free when I first opened them, they aren't now but that is all my fault. My only issue with these, and it's not much of one since I knew before ordering, is that they are not 8" x 12", they are 300mm x 200mm. They are 1.5mm thick, not 1/16". It's not an issue for me, but I'm sure there will be some who take the measurements in the description as the true size. These are excellent plywood boards and I would recommend them to anyone, I'm certainly going to order more.Update: Came back to order more, as I said I would, and in just a month the price has increased 10%. I can afford it this month because I have a few extra dollars if you can call them that due to not being able to buy the things I can't find on the store shelves anymore. If they go up any more they can keep them.

These sheets are the best I've found yet. They are well packaged to avoid humidity, they are are flat with no warps, and they do not have 'bad' spots in them from what I've seen so far. I do wood engraving with a 40w laser cutter/engraver and the glue they are made with does not hinder the cutting process at all. Plain and simple these are quality sheets and I will continue to order them. In fact, ordered 2 more after receiving my first bundle. Thank you! You'll be seeing more orders coming from me.

This lasers really nice. It took one pass an a speed of 600 and power of 75 to cut thru this 1/16 ply with my 10 watt laser with a little burning on the back. I didn't use air assist on it because I don't have one. At 800 and 40 with 2 passes I cut thru. Nice ply.

Very slight warping on some of the sheets. Consistent grain. These worked well in my diode laser for engraving and cutting. I will be buying again.

Nice straight solid wood, burnt a little on the edges. Looks laser cut, would buy again.. Wouldn't hurt to put 1 extra sheet in the box incase one was cracked or very warped. Would make the customer base very happy and bring back more repeat business (something no one else would do or hasn't yet)

I liked the price of this wood. Unfortunately I had a hard time getting my cricut to cut through this completely. I tried a few different settings but never got a clean cut. I had the best luck using the heavy chipboard setting but even after 24 cuts it was still not cut completely through. I ended up having to pop the pieces out causing some damage to the back side of my wood. Luckily I was gluing two pieces together so it worked out ok but it was still a lot of trouble trying to use this wood with a cricut. I had used the cricut brand previously and had no issue with it. As a matter of fact I was able to cut through the cricut brand after about 14 cuts. Unfortunately that brand was double the price so it wasn’t an option for the project I was using it for. This wood is very sturdy and a good buy if you aren’t trying to use a cutting machine to cut it.

I was very pleased with the quality of these sheets. They were the size they said and didn't bend too much. I used them for laser-cutting and they consistently cut and engraved well in my Glowforge.

The wood in between the outside pieces looks great. The packing however consisted of three layers of plastic that had holes and a rip. Not sure if this is vendor's fault. For the money some bubble wrap would have been good. Good product, bad packing.