John Deere OEM Grass Bag Kit L 100 105 107 110 G100 LA 110 135 145 X 110 120 125 140 Z 245 D 100 AM122416

Ordered around 9:30 AM CDT on June 3rd, product shipped from Jackson, MS on June 4th, delivered to my door in Nebraska by 11:30 AM CDT on June 7th. I couldn't ask for better service. I wasn't sure from description if this included new steel frames as well as new bags; though I didn't think the frames would be included for the price of $75.00 per pair and a weight of 8 pounds. I received two VERY much improved bags, plus screws & lock nuts to re-attach the frames and easy to understand instructions. Only difficulty was drilling out the rivets (JD used really strong ones) but once that was done taking the old off, putting the new on and replacing the rivets with supplied screws and lock nuts was a breeze. My JD L110 is over 10 years old and the old bags used a rope handle looped through metal grommets in a rather flimsy plastic fabric bottom. After 10 years the bottoms had cracked and finally the rope and one grommet pulled out of the bottom of one bag - the other would have failed within a few more uses too. These new bags have a semi-hard plastic bottom with a nice wide nylon strap that is well attached to the bottom. Additionally they have much improved air flow so I'm looking forward to fewer grass plug ups and easier emptying. These are genuine OEM grass bags for a great price compared to dealer prices. If you have the old style bags - spend a little money for these replacements and save yourself from the frustration of having the old bags fail.

I agree with earlier review that these are the solution to bag replacement for the listed mowers. People seem to have struggled with some other bags sold on amazon, but these are JD and they do fit once you get the hang of assembling them. Time will tell, but the quality seems better than the original and the air flow improved.I suggest you drill out ALL the rivets and remove the hanger bracket from the bag frame. You can either slide or cut the old bag off. Then sliding on the new bag is easy-just make sure you end up with the solid fabric side to the mower so the bag breathes away from the rider. Four bolts per bag frame are provided ( even though the directions say two) to re-bolt the hanger brackets to frames.By the way the cost for this listing is for a TWO bag kit, so it prices out well against the other bags sold on amazon.

Worked exactly the same as my old bags. Perfect fit.

Great replacement bags. Drilling out the old rivets was fruitless. If you have a grinder, use a cut off wheel and turn this into a 30 min install. Be aware of the fitment of the new screws and lock nuts. If they aren't in the right orientation your bags won't go back on the mounting bracket tab on your mower. IF you have the ability run rivets do so! 1/4" × 1/2 long steel rivets made it a dream.

As advertised

The worst thing is the oversimplification of the instructions. Tip to others: After you note the orientation of the old bags, CUT them off. Drill out all 4 rivets on each mounting and be patient... First one will probably take you an hour. Second about 10 minutes. Seller really should have made a video of the install for us end users.

Be prepared! You have to drill out the large rivets on the frame to get your old bags off which was a bit of a pain( a little tip, punch out the center of the old rivet with a nail or nail punch then use a regular bit to drill out the rest. That made it much easier) . The new bags fit great and are excellent quality. Thet come with bolts and nylon locking nuts so these babies should never rattle loose and fall off. Very happy with this purchase!

Full plastic bottom on the bags is a good improvement to the original vinyl bottoms. The instructions were clear and easy to follow. The bags have been used all summer and have worked perfectly!