Granberg Chain Saw Mill, Model# G777

Q: Sounds like the Stihl MS180C is too weak (32cc). Would it work just for a trial run? What 20" (but not too $$$) saw is recommended?

I have a Stihl MS170 that I use with this mill. It out performs my Husqvarna 450 Rancher for milling logs. The down side is the Stihl is only a 16" bar and my Husqvarna is 20". But I usually have to make two passes anyways because the logs I mill are no less than 24" in diameter. I do wish the mill had longer rails to ride on top of the log. My rails are too short for the extention ladder I use as a guide for my first cut.

Q: I a saw chain b2ft-64dl .325" .058"/1.5. would it be good for the mill? are there any better choices for this job? where can i find them? thank you

Your chain saw blade needs to be at least 20 inches long. If it"s longer, that"s OK. Your chain saw motor needs to be at least 55 cc. less than that and your motor will fry. When you use a chainsaw you usually cross cut wood in a matter of 1 or 2 minutes running the saw at top speed. When you use the Granberg Mill you are cutting the wood with the grain and running your saw at top speed for up to 1/2 hour. This is why your saw needs to have a bigger engine.

Q: Will this work with a 24" or is there a better choice?

Yes this will work fine with a saw with a 24" bar on it. It will make cuts through logs up to say 20" diameter.If you have a 24" bar I would consider getting an alaskan Mill mkIII in the 30 or 36" range(can be adjusted down to fit your smaller bar length). This model only clamps to the saw blade at one side. If you are cutting larger logs then your saw will have more of a tendency to dip out at the tip where the blade is not supported by the mill.You can order new rails and an accessory kit from granberg to convert your Alaskan mill to a MkIII. Thats what I did when I outgrew this unit. When i upgraded my mill to a MkIII I also got a bigger saw to push it.. my ported Stihl 290 worked fine with an 20" bar but I switched to a Stihl 660 to push a 36"bar longways through that much wood.

Q: I bought this as a gift. Can someone recommend a good chainsaw that will work well with this.

Works well with a Stihl MS251. Most people say you need around 60CC to be happy milling, but if you keep it to softer woods, smaller logs, or go slow, you should be fine with 45-50CC

4.6/5

Product ID: 235964760

Secure Transaction

Details

Brand
GRANBERG
Horsepower
1 Kilowatts
Item Weight
0.11 Pounds
Global Trade Identification Number
Manufacturer
FEIN
UPC
012714547771

📏Compact 60.96 x 33.02 x 10.16 cm size

🪓Lightweight 49.9 g for effortless handling

⚙️Precision-engineered durability

Frequently Bought Together

Granberg Chainsaw Alaskan Small Log Mill, G777- Portable Sawmill Timber Attachment Machine Tool - Wood Case Cutting Holder Equipment Guide Kit - Bars with 16-20 Inch - Lumber Milling Wedge Tools

Granberg Slabbing Brackets by Granberg International

5.5 Inch Felling Wedge Chain Saw Logging Supplies Set of 4

Description

🪓 Slice through your projects with precision and ease!

BUILT TO LAST - Crafted with premium materials for unmatched durability in demanding environments
SECURE PACKAGING - Arrives safely packaged to guarantee pristine condition on delivery
COMPACT POWERHOUSE - Optimized dimensions ensure easy transport and storage without sacrificing performance
EFFORTLESS MOBILITY - Ultra-lightweight design reduces fatigue during extended use
TRUSTED BRAND LEGACY - Manufactured by FEIN, a name synonymous with quality and innovation

The Granberg Chain Saw Mill G777 is a durable, lightweight, and compact milling solution engineered by FEIN. Designed for professionals seeking reliable performance and easy handling, it combines premium build quality with portability, making it an essential tool for efficient wood processing.

Specifications

Brand	GRANBERG
Manufacturer	FEIN
Model number	G777
Colour	silver
Item Weight	49.9 g
Product Dimensions	60.96 x 33.02 x 10.16 cm; 49.9 g
Item model number	G777
Item Height	4 Inches
Item Width	13 Inches
Are batteries included?	No

Have a Question? See What Others Asked

Sounds like the Stihl MS180C is too weak (32cc). Would it work just for a trial run? What 20" (but not too $$$) saw is recommended?

I a saw chain b2ft-64dl .325" .058"/1.5. would it be good for the mill? are there any better choices for this job? where can i find them? thank you

Will this work with a 24" or is there a better choice?

I bought this as a gift. Can someone recommend a good chainsaw that will work well with this.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

93518₫

Duties & taxes incl.

Vietnamstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Pooja R.

The customer service exceeded my expectations. Perfect for buying products you can't find elsewhere.

1 week ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App