3M All Weather Flashing Tape 8067, 9 in x 75 ft, 1 Roll, Adhesive Backed Split Liner, Prevents Moisture Intrusion, Waterproof Flashing Seals Doors, Windows, Openings in Wood Frame Construction

IMPORTANT UPDATES TO REVIEW, CIRCA OCTOBER 8, 2020, AND JULY 7, 2021:OCTOBER 8, 2020 UPDATEWhile my enthusiasm for this product remains unabated, there is a really BIG problem that surfaces with certain rolls and even entire batches of this tape, in my experience across both width sizes that I use, namely, 2" and 4". The problem is a Quality Control (QC) and Quality Assurance (QC) problem, or rather a lack thereof, along with an underlying production problem at the factory.The problem is that some rolls of the tape, when the plastic wrapping is removed from the roll and the roll opened, turn out to be missing the slit in the tan paper backing (aka liner). In most cases, if the first few feet of the roll are missing the slit, then the remainder of the roll is missing the slit as well. In other cases, the first 5 or 10 feet of tape on the roll seem to have the slit, but then, as you go further into the roll, you discover that the slit is entirely missing, or is not sufficiently deep.Of course, the missing slit makes it NEAR-IMPOSSIBLE to use the tape in the real world, for it then becomes very difficult to remove the paper backing/liner from the tape.I first discovered this problem on some 4" wide rolls of this tape a bit over two years ago, but unfortunately, those rolls had been ordered from Amazon over a year earlier, and thus they well past the product return period. The ugly reality of this ongoing issue was again slammed home for me today when Amazon shipped to me four rolls of the 2" wide tape, and upon opening the box, I chose, as I always choose to do with this product nowadays, to exercise extreme due diligence by removing the plastic and paper wrapping from each roll to ensure that the slit in the backing/liner was indeed present. In the case of this recent order that arrived here today, ALL FOUR rolls were completely missing the slit, although the packaging bore the correct 3M part number, namely 8067.The biggest annnoyance about this problem for me is that I have called various 800 toll-free customer service numbers belonging to 3M over the past 2 years to report this issue as a serious manufacturing defect and an ongoing QA/QC failure at least two times, and each time, their response was one of completely refusing to accept responsibility for the problem, as well as a complete refusal to attempt to try to prevent future occurrences of the problem by revising their QA/QC methods or by modifying/upgrading their manufacturing methods.In each case, an obviously bored and apathetic and totally disempowered low-level Customer Service staffer essentially said to me, in effect: "Well, what do you expect? The stuff is manufactured in overseas factories, usually in Asia, and our warehouses have to accept the boxes of rolls shipped to them from the factory on an "as-is" basis. You cannot expect our warehouses to check each roll individually to ensure that it was manufactured properly! That would be way too coastly!"In each case, they refused to elevate my call to supervisors, or to the Engineering department.JULY 7, 2021 UPDATE:My problems with the lack of the backing slit on rolls of the 2" widh tape shipped to me from Amazon continue. I ordered 5 rolls of 8067 tape a week ago from Amazon (Amazon was seller and shipper), and all 5 rolls were totally lacking the backing slit upon arrival. Pending my return of the 5 bad rolls, Amazon went ahead and shipped me 5 new rolls as a replacement shipment for the first shipment (which had contained the defective rolls).That replacement package of 5 rolls arrived here yesterday, and again, all 5 rolls were totally lacking the backing slit, and have also been returned to Amazon!BTW, yes, as other reviewers have pointed out there also exist other problems with the backing paper: it is indeed true that many rolls exhibit delamination of the backing paper, leaving thin layers of tan paper on the tape, which must be removed using a thumbnail, often with great difficulty. Again, this is all evidence of woefully lacking QA and QC on the manufacturing end!In closing, since I have never been able to get any accountability, honesty, or satisfaction by trying to call any of 3M's toll-free phone numbers, this time I have asked 3M, via Twitter, WHY they have not yet fixed the MAJOR QA & QC problems with the backing paper on these rolls of tape, given that so many reviewers have mentioned the problem over the years, and given that angry customers have even called their toll-free phone numbers to complain about such problems. Time will tell if 3M ever responds to me on Twitter with any kind of reasonable answer!- - - -So, bottom line is that I continue to purchase this tape and to use it, but, since I have been burned more than once by finding bad rolls belatedly, I now religiously exercise extreme due diligence upon each order of tape as it arrives, and I partially unwrap each and every roll to inspect it and ensure that the backing/liner slit exists, and that it is sufficiently deep.- - - - - - - - - - - -My original review:This stuff is amazing. I love it! Even though I do not work in the contracting, construction or home repair fields, I use this tape all the time, and I am constantly finding new uses for it, indoors and outdoors!I have bought at least 5 rolls of this tape from Amazon over the past two years simply because I find so many things to use it for, including sealing gaps along seams in walls of sheds, barns, chicken coops, and storage huts, and sealing seams and corners in buildings to prevent drafts and insect infiltration. Believe it or not, that previous list covered only about one-third of the applications that I have found for this tape, and I particularl ylove the split liner, as it makes precise positioning during application very easy.The tape has an incredible adhesive that sticks permanently to almost anything. The tape, that is, the backing, is incredibly flexible, stretchable, tough and durable. In fact, I kinda want to type each of those afore-mentioned qualities in ALL CAPS because they are so notable and so useful.There is no application for which I have tried to employ this tape where it has ever failed to work perfectly, and this includes really odd and strange things such as permanently sealing and repairing a minor crack in the wall of a 5 gallon flexible HDPE jug holding water while the container was full of water and while the small crack was still leaking small amounts of water (in fact, I have used this tape to permanently repair minor leaks in the walls several filled flexible HDPE jugs while they were filled with water and actively leaking. I have also used this tape to seal a fully-exposed seam between two panels in the sloped plywood roof on a shed in my backyard, and it has held up perfectly, despite constant exposure to weather, including sun (although there is some shading from trees), wind, rain, hail, ice and snow.I also have used this tape to seal around holes where non-metallic and metallic electrical conduit passes through concrete walls, even in wet areas, and I have also used it to seal long cracks (due to sun damage from 5+ years of sun exposure) in the flexible clear plastic walls of a hoop-style greenhouse. It works perfectly in all of these applications.I recommend this tape highly. The only limit to what it can be used for is the limits of your imagination.

Although it is a rather expensive purchase for the hobby, this is an amazing tape to use to increase the longevity of foam weapons (Belegarth, Amtgard, other LARPS, etc.). Gently lay it against foam that you want to prevent from tearing - or even foam that is starting to show the first signs of breaking down (DO NOT COMPRESS the foam or you will make the weapon hit harder) and it will become a soft and squishy "skin" on the surface of the foam that will protect it without reducing its ability to flex and cushion too much. Unlike duct tape, you can use this on the striking surface any not make the blade "slappy." Unlike duct tape, I have not seen this lose its grip with time.

This tape is super sticky. Holds tight to any surface. It also is stretchy so you can go around curves and uneven spots. I’m pretty sure it will work to keep moisture out from around my windows and doors. Hope it works for you, too!

When I first started using this tape I was not sure that I was going to like it. I first used it to seal the corner of the window before the window was installed. Then after installing the window I used it to flash all the way around the window. I have used 5 or 6 rolls now and really like this tape. It is supper sticky but if you don't press it down, you can peel it back and re-stick it back down. After getting it where I want it I used a rag to press it down permanently. It has quite a bit of stretch to it so it can go around curves if needed. I used the 2" tape and it does not have the split paper backing as stated in the description.

Super sticky but expensive. I would use it for more things if it wasn't crazy expensive. Good product.

I use this tape on everything outdoors. Patch my car tarp, my gazebo tarp, wrapped my entire outdoor workout bench cushions with it. It's proprietary acrylic stick on is like nothing else on the planet. This stuff has been working great for years and I keep buying more. Yeah it's expensive but Gee does it ever work great. There is another "stretch" tape but it does not have the sticky sticky wickky grip that 3M puts on this. Did I tell ya that it's from outer space technology, this stuff is magic.

Tan is misleading - the release liner is tan, but the tape is beige with black 3M lettering. I used this on an exterior deck project to separate all the galvanized metal surfaces from the pressure treated lumber to inhibit galvanic corrosion. We applied the tape to the metal. Fasteners piercing from the sticky side worked fine. But, a few fasteners needed to be installed through metal holes from the non-sticky side and those would tend to grab the adhesive and tear-up the tape. To prevent that we needed to cut the tape out of the hole by plunging sharp screw threads through the hole, which worked pretty fast. It takes a while to tape all the metal, but I'd do the same thing again.In addition I taped the top surface of all the deck joists to inhibit joist rot that tends to occur at each gap in the surface planks.I fastened all my surface planks with CAMO SST screws, which worked great through this tape. I'd do that the same next time too.Here is a great trick for starting the tape: bend near the center to get to the release corners at the center slit; pull those away from each other to expose about 1.5" and fold those back; then flip over and cup the tape so the adhesive side is convex which makes it stiff enough to support it's own weight. Now align the tape with the starting point, being sure to touch where it needs to be on the first try. If you miss, it is unlikely you can re-position and will probably need to waste that piece and start-over. If you are taping a long run, roll the spool over the start point to reach the release tapes; then release the section that is still wound around the spool; then roll the spool using it to press the adhesive onto the work. This trick keeps the adhesive under tight control so it doesn't stick to any wrong places.

Strength and adhesion properties perfect

This is not 8067 from 3m. Not sure if it is a knock off product. I called to confirm that 3m has not changed the print on this product. They confirmed that the print is still tan colour with all weather flashing tape on the tape. This is a white background and 3M printed on it.

Sticking and holding strength very reliable but that also makes it difficult to work with if you are a beginner DIYer (you will waste more than you actually use because of the stickiness). That said once you figure out how to best manipulate the tape it provides great air sealing and longevity. Used this to air seal around a new window install. Even in cold weather it did not peel off.A little thinner tape than the store brands that peel off Without much effort

This stuff is absolutely AMAZING! Supper thin, super tough and ridiculously sticky! Doesn't bunch up in the corners like Bluskin, so it has no impact on how the windows sit in the rough openings. This is THE product for anyone serious about sealing up against exterior air or water intrusion. Its expensive for sure, but totally worth it IMO. We changed out all our windows several years ago and used this product at the recommendation of the window manufacturer. Since then, I have literally found a dozen other uses for the little bit I had leftover, so much so that now I need to buy another roll....and I don't even have any windows to install! I've used this stuff to patch leaks in an old hot tub, repair pool floaties, fix my work boots, patch a small pinhole leak in my kayak, repair a torn bike seat and even patched my bike tire in a pinch! Its basically like duct tape on steroids!!!

Good product but arrived defective.This is my third purchase of this product.The first time 1 year ago was excellent, the second time some rolls had defective split lines.In the last order, none of the rolls had any Slit Liner.Looks like the quality of the 3M product degrading more every year, a lot of negligence during the production process along 3M product lines.