Parts Kit DG138 Replacement for Brinkmann Heavy-Duty 810-8501-S Gas Grill Burners,Crossover Tubes, Heat Plates

This kit installed fairly easily and works perfect with my grill. Let me start by saying, my grill is Brinkmann ProSeries model 810-8533, which is not listed in the description as compatible with this kit, but with a little research and measuring of my burners, I decided to order it anyway because it met most of the specs. The kit did come with 5 burners and 5 covers, even though my grill only needed 4, but I figured hey always good to have some extra parts.The only cons with this set is that they come with sheet metal screws instead of nuts and bolts. I guess sellers anticipate most buyers needing to make modifications, however theses burners lined up exactly with the existing holes on my grill so I just went to the hardware store and bought a few sets of nuts and bolts. The carry over tubes were a little long for the space between my burners, but again I figured that might be because the set wasn’t technically made for my grill. It ended up not making a difference though because I was able to wedge them into place with a pair of pliers. I also had to make some minor adjustments to the shutters on the burners to get my gas/air flow ratio just right, but now all burners are lighting with vigor and I’m super happy.All of my old covers and burners were rusting and literally falling to pieces. This kit cost me around $35 instead of the several hundred I would’ve spent to buy a whole new grill.

I’ve had my bbq for years & finally had to repair & replace some things, as expected. The price on replacements is just too high to not try fixing it up.This kit is nice for the price, but a bear to install.First, I had to swap the end-pieces on the tubes, as the new ones had too large of an opening (photo of new one).Second, I had to drill my own holes in the tubes in order to line everything up. The elongated holes need to be a bit longer or moved closer to the end.Considering the amount of restoration I did to my grill, the retrofitting was a nuisance, at best. All said & done, if you’re not able to drill stainless steel parts, this might be a problem.

It a nice kit heat tubes 1/2 longer and baffles had to cut with cut of wheel and I had to unfold the baffles to high the screws were not useful as mine had nuts and bolts holding it down. But all in all I replace the worn parts and now have a working grille. One more thing no instructions. I made it work saved money my grille same one is 459.00 now. I received all parts and now work great.

This was not the right size for the brink-man grill that is listed it fits in. My husband had to cut them shorter . Was inexpensive so glad was able to cut .

This product was packaged well. Had screws and would have been great had I measured correctly.

Product worked as expected. I had to modify the burner guards (commonly known as “burner tents”) The modification wasn’t due to wrongly listed measurements. I purchased knowing they wouldn’t fit, but could not find any other kit that would work. Most importantly the measurements matched to the description. Will see about longevity in time.

Although they specifically stated it fit the make and model of my grill, I had to heavily modify my grill for the new burners. They are about a half inch too short. In addition to that, the burner covers are much smaller than the originals. Brinkman model: 810-8501-S

Tubes are too short by 1/2 does not fit Brinkmann grill