Pack of 2 LCD Digital Fridge Freezer Thermometer Monitor with Hanging Hook and Retractable Stand

Title says it all, really. Easy to set up and use, the rotating hook/stand is a good idea depending on whether you want to hang or stand it up. The magnet on the back's plenty strong enough to hold their weight, and they're nicely designed with a big and clear display. Looks/feels like they're going to be pretty durable and, as far as I can tell, the temperature measurement's accurate. The one in the fridge shows 4°c and the freezer -18•8°c, which is mid range for what the fridge/freezer's handbook says the temps should be, based on the settings for both. The leaflet says to remove the battery cover, and remove the film seal to allow the battery to make contact. No need. There's no film in there and you can switch it on, straight out of the box. Well Impressed, especially by the low price 👍.

Was concerned that my fridge/freezer was not cooling properly, so got these to check temps. At first the fridge temp was between 6c and 7c and thought i was going to have to either get a new one or get this one serviced. Seen online that you need to put a thermometer in the middle of the fridge and not on the top shelf, when i placed it there it is now around 3c. In freezer it shows LL. Not perfect, but at least the freezer is working.

This fridge thermometer is a great tool for keeping track of your fridge’s temperature. The readout is clear and easy to read, so I always know if my fridge is at the right temperature for food safety. The hook design is super convenient for storage, as I can easily hang it right inside the fridge without it taking up any space. It gives me peace of mind knowing I’m staying within the safe temperature range. The only downside is that hanging it isn’t as easy as it sounds—it can be a bit tricky to position just right, especially if you have a crowded fridge. But overall, it’s a solid and useful tool to make sure your fridge is running efficiently. Pros: Keeps you updated on your fridge’s temperature Clear and easy-to-read display Convenient hook for storage Cons: Hanging it can be a bit tricky, especially in a crowded fridge

Fridge and Freezer monitors for my Kitchen appliances work well and are unobtrusive in use

Only one of the devices works. Tried changing the battery and one of them still won't turn on. So half stars for the working one.

They work, they last and they are good quality. Happy with my purchase

I bought these because after cooking several meals and finding that they weren't fully cooked I suspected that my fridges and freezer were running much colder than they should be. These thermometers showed LL.l meaning that my freezer was running below -20 degrees C, possibly wasting electricity and spoiling the cooking. The recommended freezer temperature is -18 degrees C. There is too little leeway here so I don't know what the freezer temperature is, just that it is below -20 degrees C. Thus they are not really fit for purpose for freezers, only fridges. The recommended fridge temperature is 1.7 to 3.3 degrees. I keep them in the fridge and freezer switched on all the time. I managed to reverse the clip on one by gently prising it off with a knife and refitting it the obvious way round. Mounting them using the magnet on the outside door is mad. You would be measuring the room temperature as the door will be filled with insulation. I like the big clear display and the fact that they react quickly. I tested them both in the same place and against an expensive laboratory standard mercury in glass thermometer. There were differences in reading of 1 or 2 degrees but that's to be expected in any mass produced uncalibrated device. The differences are not so large as to make them useless. Comparison wasn't easy because the mercury thermometer is relatively very slow acting and hard to read. It's a pity they don't give readings below -20 degrees C, they just read LL.L. I might reset it but I will try to buy a thermometer that will read lower temeratures first. Straight out of the box they both accurately indicated the room temperature as 19 degrees. Placing both in one fridge side by side at the same time I got readings of 6.3 on one and 7.0 on the other. Placing them both in my other fridge: one read 1.6 and the other read 1.9 while the mercury thermometer read 2 degrees so they look accurate enough to be useful. There was no insulating plastic strip to be removed. My mercury thermometer only reads to 0.5 degrees. Each uses one CR2032 button cell. They are made in China.

2nd set of these I've bought (two fridges & two freezers) - absolutely spot-on - enough said... 10/10