Update International SPS-20 Induction Stock Pot, 20-Quart, Silver

I got this for brewing beer in small 2.5 / 3 gallon batches. Was going to go with the cheapie $40 one I also found on here but decided that spending $15 more on a much higher quality kettle would be worth it, and I was most definitely correct. It came in a box that looked like it had been through hell and back but the kettle itself showed not a single dent or scratch. I tested the strength of the walls by squeezing hard on the sides of the kettle and it barely showed any flexing. I can tell that this is a very durable product that will last for many years.Couple of notes:* The kettle bottom, body and lid are stainless steel and magnetic so they should work fine with an induction heater. The handles are non-magnetic, possibly aluminium* The bottom is completely flat, which is also important for cooking with an induction cooktop* The internal dimensions are ~10x11.5 inches, so using some basic math to solve for the volume of a cylinder we can see that the maximum volume would be about 4.5 gallons or 18 quarts (17 liters)* The bottom is REALLY thick, a bit more than 1/2 an inch, which is great for evenly distributing heat and maintaining temperature* The design of the kettle is quite nice, whoever made this definitely put time and effort into every detail

This pot browns very well. Things do not stick to the bottom that easily. The heat very well distributed over the entire pot.It is very durable and easy to clean for the size pot it is.I have had family and friends over and just stirring the pot they where very impressed.

This is my first stainless steel pot and I am delighted with the results I achieve using it. It was delivered on time, well packaged and in perfect condition. I cleaned it as instructed. I was concerned by the note in the pot saying it was "for cooking sauces, but not storing them. Food stored in them for a long time may acquire a metallic taste." Since the soup was to be stored in this pot for about a week, I was concerned this problem would arise, but it never did. The soup was delicious, storing it in the pot for a week and a bit caused NO metallic taste to transfer, and it cleaned up like a dream. I purchased this pot because of my new glass stove top, knowing I could not use the large ceramic pots I had been using previously. I also purchased two smaller stainless steel pots from this company, both 8 quarts, and they are performing excellently as well. I can highly endorse these pots! They are much more reasonably priced than many other quality stainless pots and perform beautifully. Update International (SPS-16) 16 Qt Induction Ready Stainless Steel Stock Pot w/Cover

This is a great heavy, heavy duty pot. I use it for my home beer brewing as a brew kettle over a propane burner and it is awesome! It is big enough that I never have boil overs and the steel is so thick I had my valve fitting welded on instead of using a removable weld-less through fitting. The bottom is tri-clad and about 1/2" thick. It is a great value. The inside and lower outside of the pot is not finished to a high smooth gloss like some of the more expensive pots but I have not found any negatives to that as far as cleaning or cooking go. I use a Scotch Brite pad for cleaning it and have noticed it getting a smoother finish. The handles and lid are incredibly well made. I know I will never need to replace it. I just might buy another one.

I have had this pot for almost 3 years now. It was a bit of a gamble when I bought it because I couldn't get a clear idea of how good the insulation of the handles from the heat of the pot actually was. I am pleased to report that it has never been a problem. Although they are not cool to the touch they have never even been even uncomfortably warm no matter how how the pot itself has been. Beyond that the pot has proven to be perfect for many uses, with very good heat transfer during cooking and easy cleanup afterwards. I was tempted to get a larger size but am glad I did not because the weight of a full 12-quarter is as much as I would want to lift off the stove safely. This was an extremely good value and one of the best kitchen purchases I have ever made.

These must be seconds given the number of people that complained. Mine had a small dent also in the bottom rim. Doesn't affect how it works at all, still sits flat and cooks great. These are actually great pots, very heavy and very well made, for the price, it was worth the small dent. Just be aware of what you are getting.

Does not fit normal stove.I sent it back as it wouldn't work. But the construction was beyond excellant.

We have an even larger pot by this company and it’s good too. Works fine on induction range. Cleans easily.