Dryer Vent Cleaner Kit -30inch Clothes Lint Trap Long Flexible Pipe Refrigerator Coil Brush and 24.4inch Flexible Crevice

Really made well It will not fit on the end of my vac hose =( The brush is great and cleans inside dryer vent real well

The brush works very well to clear out the dryer vent trap and the vent hose. The handle is secure and the brush is heavier than expected. The crevice tool arrives folded in half (for no reason other than to make it easier to ship) and while it its flexible to a certain extent, you cannot use it unless you heat the plastic and gently reshape it so its straight. You can place it in the oven at the lowest setting or you could also use a heat gun. Once you get it straight, it works well. I used it to clean the dryer vent, the refrigerator coils, under the stove and under the seats in my car. This set still seems overpriced but it is heavier than most and it makes the task of cleaning out the dryer vent much easier.

These tools made cleaning my refrigerator coils super easy. The brush is good and stiff and the vacuum attachment makes clean up easy.

I bought this to help clean the coils below an old refridgerator. Really handy.

Brushes are way too thick, at least for my whirlpool fridge. The cooling coils run sideways to the front access panel brush is way to thick to be able to squeeze in-between tiny openings. This is also super frustrating because once you see these coils you can't help but think that coils were installed sideways on purpose to make them near impossible to DIY clean!

We have used these so far on the dryer's lint drawer and the coils under the refrigerator. Worked great for both. The rubber nozzle arrives bent in half (so does the brush but it's easy to unfold) and I tried hanging it overnight as some reviewers suggested, but in the end we used it in a sort-of-bent position and it was fine. Good price, too.

it seems to work well and get down in my dryer to clean it out.

The first picture shows an opening at the end on the flat side for cleaning to the side, such as for refrigerator coils. That is why I bought it and it only has an open end. It also comes with a semi permanent bend in the middle, making it useless for any application without extensive heating and straightening.