MD6821 Single Screen Mount, Monitor Holder 1 Monitor for 13-32 Inch Monitor Desk Mount (80 cm Rod) Monitor Stand & Arms

I bought this as I wanted to raise my monitor a bit higher than my previous arm would allow. This does the job perfectly and was easy to put togther. It comes with options to fix or clamp it to the desk, and I chose to clamp it so that I could move it if necessary. Once assembled and clamped it's very secure and sturdy, with a good range of positioning options. It even comes with a few clips to tidy up any cables. All in all a good product.

Well made robust product. Easy to assemble. Not going to fit every desk or in all circumstances. Bracket needs to slide alway onto desk without obstructions. I had to remove clamp plate on bolt and insert a wooden block. Also remove plastic nut on bolt as it was in way of desk. I had to remove the foam tape (replaced with cloth tape for desk protection) under base as it would not clamp down level to desk. I like others found it impossible to clamp the tilt function. Monitor kept falling forward. I had to loosen the bolt then retighten it, easy.

Very sturdy stand. I was pleasantly surprised, given the price. I bought two of these to give me some flexibility to allow me to use my desk standing or seated. You can slide the monitor up and down on the pole. Recommended, though be prepared to have to fudge the install to suit your desk (as the clamp may not suit every desk shape).

Relatively simple to put together. I'd estimate about 30 minutes set up time (excluding drilling the holes - I went for the hole in desk method since my desk is built into the wall). The quality of construction seems reasonable for the money. Monitor fits on via standard vesa mounts. All screws and tools included. Now my only slight issue is that the arm to pole is controlled entirely via tightening a nut on a bracket. This sort of works but I could still move it up and down even tightened as much as possible. In fact the only thing preventing it sliding down in use, is the lateral force caused by the weight of the monitor and the arm sticking out... I held up a 23" monitor which weight about 3kg, but I'd be hesistant to use this for say a 27" monitor or anything more than about say 5kg... not convinced with a 10kg load. Overall, it's pretty good for the money, and if you want a double/extra height stand, at this price range (sub £40) you're pretty limited on decent choices...

Holds up my 27 inch curved msi monitor with no problem at all, feels nice and sturdy and no worries that it will drop off. Easy to set up and install, takes about 5 mins and easy to adjust the height. It looks good as well and even has a little bit for hiding some of the cables round the back. Overall, a great product if you’re looking for a monitor stand

Sturdy, simple enough to install; however may be a struggle for a single person who tries to rush installation or sucks with things like Ikea furniture (jokes aside you might want a second pair of hands so you don't drop a screen whilst attaching). It can attach to tempered glass desks no problem, and has a great height that allows it to reach easily above 27 inch monitors and probably 32 inch monitors as well. I've currently got two 27 inch monitors stacked one above the other and I can easily adjust the monitor on the arm to go where I need it to. The set comes with hand Alan keys with places to store them all on the monitor post itself which is a Godsend. Well worth the price and easily the best value for money and quality on this product.

I ordered this for a 32 inch screen that I wanted to be able to reposition and rotate easily in a small space. It's used for a home arcade set up so most of the time the monitor is rotated vertically. It sturdy and holds it's position well. Any height adjustment needs the allen key to be used - not too much of a problem but I've used stands before that don't. The key also needs to be used when altering the tilt, but that might be because of the weight of the monitor. The rotation and arm movement is fine without the key and can be repositioned easily. I'm happy with it, good price and it does what I needed it to.

A few screws, up and running, holding a pair of 22" monitors, no fuss or drama, which can't be said for some more expensive arms that just don't work as described. You may get a clone at a cheaper price as they come under different names.

Apres autant d'utilisation je le recommande a 200% car toujours en place et je bouge souvent mon écran.

EDIT #2 ya compré un 2ndo! Agregue fotos ya de los 2 brazos (editado para agregar más). Es mi primer brazo para monitor. Si me tardé en armarlo ya qu vienen para poder poner de 2 maneras diferentes, me puse a leer los instructivos a detalle y claro como iba sostener un monitor que acabo de comprar. Quería que estuviera bien instalado. Quería este brazo ALTO ya que iba poner un monitor de 22"en forma vertical (para leer documentos) [ver imagen]. Por ende tenía que tener mucha distancia (espacio) entre el escritorio y el monitor (o en mi caso más espacio entre el piso y el monitor). Para poder tener una trayectoria de la vista en un movimiento normal y no torcer hacia abajo (inclinación) para leer el documento. Este brazo mide 80cm de alto, si hubiera comprado uno normal de 40cm, me hubiera quedado muy abajo el monitor por lo mismo que tendría que forzar la vista hacia abajo cada vez que tenia que voltear al monitor.

Really good monitor arm and for me the welding for different parts was also done well. Really solid and sturdy pole. Arm also is nice and strong. Paint quality also is really good and well done. Only gripes I came across are the fact that you are provided with 2 sets of screws instead of 3. If you want to use just the red lower spacers instead of the red and black spacers combined, the provided screws don't work with them. The short screws don't catch to anything when you have just the red spacers installed and the long screws are way too long and they hit the bottom before they tighten anything. This was also the case with the black spacers. So they should provide third set of screws which would work with the red spacers and maybe even with the black spacers. Now I have red AND black spacers installed with the provided long screws so I could mount my monitor. The other gripe is the fact that the mounting design between the VESA plate and the monitor arm itself is a bit sloppy. You slide the VESA mount on the monitor arm bracket and everything's good but there's some play back and forth in the monitor arm bracket. This is a bit annoying when you try to tilt the monitor to adjust it but instead you are just slapping the VESA mount and bracket around instead of doing any adjustment. Thankfully this was easily fixed by installing piece of folded printer paper between the VESA plate and the monitor arm bracket. Now it's as tight as rest of the arm and the pole. So, for this price I can recommend fully this product. I even go as far as saying FOR THIS PRICE THIS MONITOR POLE IS MUST BUY!

Works, easy to install and seems like good quality. I’m not gunna deduct a star for my inability to read descriptions. But this is not what I wanted. I wanted my monitor to be 40cm above desktop, but since vesa mount sits in middle of monitor I don’t get my monitor all the way up. And now it has to rest slightly behind my main monitor.. To:dr: The stick is shorter than what I need. I read description wrong and assumed product would have my monitor be 40cm above desktop.

The product itself is great, little tough to get the arm in the pole but that’s minor and shows how strong the material is. The only issue was the instructions were vague and it came with a different kind of screw which weren’t in the instructions at all. However if you have dealt with assembling any sort of furniture you will find it easy to assemble with the pictures in the instructions.