Bellemain Milk Frothing Pitcher 12 oz | Espresso Steaming Pitcher, Small Milk Pitcher for Espresso Machine | Milk Frothing Cup, Stainless Steel Milk Frother Cup | Metal Pitcher for Steaming Milk

I received my Bellemain frothing pitcher (12 oz) this evening and could not wait to try it. I was very pleased with the simplicity of the design and apparent quality of the pitcher, and was even happier when I made my first butterfly pea flower latte! I use plant and nut milks, my favorite for lattes being oat milk. Within seconds, the pitcher was filled with perfectly frothed oat milk; I prefer thick froth, and this pitcher did not disappoint! Pouring was smooth and precise with no drips at all. I waivered between a 12 oz and 20 oz, but decided the 12 oz should be fine, and it was. Because the volume of liquid increases as air is whipped into it, it makes plenty for one to two mugs, depending on mug size and how you make your beverage. I heat about 1/4 C of water to steep the butterfly pea flowers in, then fill a mug about 1/3 full with oat milk and heat. I add the butterfly pea flower tea to the heated milk and then poured in the frothed milk (I filled the frothing pitcher about 1/3 of the way with cold, full fat oat milk (fav brand is Oatly) and added a little Califia almond/coconut milk vanilla creamer. It frothed up beautifully in no time at all). My mug was filled to the brim - hands down the best latte I have had - what a difference frothing the milk makes! The pitcher was easy to clean and is so pretty in its simplicity and craftsmanship that I am leaving it out on display - plus I’ll be using it everyday anyway. It can also be used to serve creamers as it looks lovely on the table.

I just bought an espresso machine with a milk steaming attachment. I've never made cappuccinos before but went on amazon and bought this frothing pitcher. upon receiving it I was surprised at how small it was since I am used to seeing large pitchers at starbucks/other coffee shops when the baristas are steaming milk. However, the instructions included with the pitcher say you don't need more than 4 oz of milk for a cappuccino and using a larger pitcher will only cause you to waste milk. This definitely seems to be the case! I fill the milk to the 4 oz line and froth/steam under the milk reaches the top of the pitcher. It really is the perfect amount of milk and there is plenty of room to make a generous amount of foam for the cappuccino. I pour in the milk + foam over two shots of espresso and sprinkle some chocolate powder on top. Its a perfect cappuccino!! I definitely recommend this for someone looking to make a single serve cappuccino - you don't need or want a larger pitcher. I think it would be tough to use a bigger pitcher and fit it under the steam rod anyway. I should also add that the pitcher is very pretty (and much prettier than what I've seen at coffee shops).

With stainless steel these days you can never really trust when a manufacturer says it is dish-washable, and often corrodes over time. Sadly, I find that to be more so the case with the fancier products I buy. So when I got this milk frothing cup and it looked luxurious, with a smooth brushed exterior and the PERFECT weight, I thought "no way this will be going in the dishwasher." Thankfully for my reviewers, my husband didn't get the memo, so this baby has taken more than a few (read: daily) dishwasher rides, and it emerges gorgeous as ever. This is top of the line quality for a steal of a price.

This is a very nice pitcher obviously made with quality materials and the capacity is large enough to melt butter for popcorn, seafood or other recipes. It also would hold enough milk to warm for your morning coffee or oatmeal which is why I bought it. Unfortunately, I have an older gas stove and the grates around the burner are almost as large as the base of this pitcher. It does work, but I have to use a very low flame and be very precise when I set it on the burner. It might not be an issue for most people, but those with a gas stove similar to mine might have this issue too. I will keep it, but I might have to look for a different option in the near future.

I picked this Frother over many many others which were advertised on Amazon. It caught my eye as a quality Frothing Pitcher and after receiving it I was not wrong. The measurement markings on the inside are very readable and the Pitcher without markings are the outside allows you to view the high quality stainless steel without markings. You'll love it and the froth it makes.

Bought this instead of the DeLonghi one because it had measurement markings (on the inside) and was a few bucks cheaper. It works great, nicely made, attractive, dishwasher safe (though we tend to just wash it by hand quickly after espresso anyway).

Thin enough to control the temperature of steamed milk using your hand-feel, yet sturdy enough to hold up to repeated use. Cleans easily and perfect size for making a small mug Espresso drink. Glad I purchased it.

Works as intended. No issues.