T-SIGN 18 Inch Heavy Duty Spinning Prize Wheel - 14 Slots Color Tabletop Roulette Wheel of Fortune - with Dry Erase Marker and Eraser Win The Fortune Spin Game for Carnival & Trade Show (Multicolor)

The base is very stable and sturdy. With regards to the assembly, the instructions do not show the plexiglass that goes in front of the spinner. We learned this the hard way; without the plexiglass in place, the spinner moves a lot and is unstable. After the plexiglass placement, the spinner works great.

Look they are not made to last past your event. I use mine weekly and I don’t see this one ever needing to be replaced. MAKE SURE YOU PUT THE LID TITE ON THE PEN. HARD CLICK! It’s the best pen I’d had for dry erase board. So thick but I didn’t seal the cap all the way. Regardless of all the warnings about it everywhere

Good buy. The bar with the ticker came off first spin but not sure if that was due to the wheel being spun too hard. I pushed it in as much as I could and kept my finger there when spun after and everything stayed in place. The base kept it sturdy - never looked like it would topple over. Easy enough to dissemble when done. Overall worth the cost

We set this up for an event our company sponsored and it was a HUGE hit! We seriously had a line at our table the entire evening. We used it to give away handout prizes. We already planned to give the stuff out, but something about spinning a wheel made everyone want to come and give it a try! If you're looking to grab attention at a booth, fair, tradeshow, etc. this item is perfect. Instead of using the whiteboard marker, we just printed and cut out little slips of paper and taped them on using double-sided tape on the back of the paper. Worked great! It was pretty easy to assemble, my fingers just got a little tired putting the screws on but aside from that it went together easily. It probably got about 600 spins at our event and is still standing strong, so I'd say it's fairly sturdy. The base isn't as heavy as I expected considering the "Heavy Duty" in the title, but it still stood up well. One thing to point out is that if you tighten the washer/screw on the back of the wheel too much, the wheel won't spin very well. I could barely get it to do a solid spin around the wheel so I loosened the back screw just a hair and it worked great after that!

This was easy to assemble, however during the test run, the little red tab (comes with 2) broke after a few spins. I tried adjusting the wheel by loosening the screw so that it wouldn't be so tight to spin, but when I did that, the wheel became a little unstable. After asking for a replacement, the same thing happened again but it was too close to our event, so we just used the 2nd replacement tab. During the event, the black knobs kept unscrewing and falling off and of course, by then end of the event, the red tab was broken. Not sure how we can fix or just replace the red tab, but as far as the black knobs go, I will probably have to super glue those on the wheel for our next ev

The directions to put this together were not good, but I figured it out. The base is heavy and it seems sturdy overall. I would suggest to the maker to not have black sections because it is hard to see the dry erase marker when writing on the black sections. It will serve its intended purpose in my classroom. I would purchase again because it is half the price of the one at my teacher store!

This was a bad choice on my part—trying to find a cheaper version of something I wanted. I got it assembled with very little help from the instructions; in fact, I had to take part of it apart and put it back together because a couple of critical items are missing entirely from the directions. Once I got it together, the wooden peg meant to hit the posts when spinning won’t stay in the spring holder; every time I spin it (even gently) the peg goes flying. The wheel hangs crooked even though assembled correctly so the bottom portion hits the pole as it goes by. It may have been cheap, but it was money down the drain. It’s not worth the effort of returning it.

Easy to assemble. Size is perfect for tabletop; we take it to vendor shows and write prizes on it and let the kids spin to win. The marker is great but is a little hard to read on the purple color. Was easy to put together and didn't take very long. The kids had a lot of fun spinning it and it held up very well with a lot of kids. Definitely was worth buying us use as a game for the kids.

It came in pieces and i had to put it together but was super easy taking no more than 30 mins . I am very happy with the sturdiness and quality of the wheel . Recommend it to others

The wheel spins smoothly, adding an element of excitement to our games. It's sturdy and built to last, perfect for multiple events. Our customers love it, and it has helped boost engagement and excitement at our booth. Highly recommended for anyone looking to add a fun and interactive element to their events.

This was used for our candy walk at our school carnival. It was perfect. The flicker did start breaking off as the spinner was used more and more. I had to duct tape it on and it continued to work (there is an extra but we forgot to bring it). The pegs also loosened over time, so we just had to keep screwing them tighter periodically

This was easy to put together and very sturdy! It works fantastic and i would recommend

This COULD be a really awesome product. However, the washers on either side of the wheel are too wide for the ball bearing ring. So if you tighten the wheel at all, the washers that overlap the edge of the ball bearing ring tighten against the rest of the wheel and stop it from spinning. Other people have complained about the wheel not spinning well and the seller tells them to just loosen the wing nut. If you loosen the wing nut, then the wheel is not spinning on the bearings anymore and the wheel wobbles when you spin it. All they need to do is provide a narrow washer that lines up with the ball bearing ring and stops the wheel from rubbing against the stand. That probably makes no sense at all unless you have tried this product, but this design flaw completely ruins the functionality of this product. You will also notice in the attached video that I had to replace the plastic tab at the top.