Question 1

So you just tap into the rear speaker line and that's it ? How's the sound quality?

Accepted Answer

If you are using this to add subwoofers to a stock head unit You DO NOT tap into REAR speakers. Use the front channels. This is why wires are gray and white ( just like front leads ) there is more signal from the front channels. This has been proven with data just do some research. Bass response will suffer using rears. A mono signal is only one channel and is what you want for bass not stereo. DO NOT use two stereo rca's in the two inputs for your sub amp. Subs don't like stereo sound. Just plug in to the left(white) one or better yet get a Y splitter and plug that into the single lead from this LOC and the other two ends into the two RCAs on your amp effectively increasing the sensitivity. I've tested all possible permutations and the data in conclusive. Your welcome!

Question 2

what is the brown wire for

Accepted Answer

I needed to use the brown wire to ground the adapter because of a buzzing sound when it was not used. Good news: The buzzing stopped and sound is fantastic.

Question 3

I have a 16 sierra with Bose system, including small sub, will this work coming off the factory sub speaker lines?

Accepted Answer

If the out put on your stock speaker is more then 50 watts then no it will not but if it's less then 50 watts then it will work

Question 4

Do I need 1 or 2 line out converters for a 4 channel amp install to a factory stereo?

Accepted Answer

Very simple.. If you are running 2 subs, you'll need to use both rear speakers and hook up the R. & L. Output from the converter to the R. & L. input on your amp and select the "stereo" setting (usually a switch) for stereo sound.. if you are only using 1 effin, then all you need to do is hook up 1 of the line in from 1 of the speaker's wires and run the rca connector to the amp and then flip the switch to the "mono" setting.

ASIN	B00I4EF1BC
Audio Output Mode	RCA
Best Sellers Rank	#482,514 in Electronics ( See Top 100 in Electronics ) #567 in RCA Cables
Brand	KICKER
Brand Name	KICKER
Compatible Devices	Speaker
Country of Origin	USA
Customer Reviews	4.5 out of 5 stars 6,836 Reviews
Global Trade Identification Number	00713034065166
Included Components	46KISLOC
Interface	RCA
Interface Type	RCA
Item Dimensions L x W	11.4L x 5.1W Centimeters
Item Weight	0.1 Pounds
Manufacturer	Kicker
Maximum Supply Voltage	8 Volts
Minimum Supply Voltage	8 Volts
Model Number	KISLOC
Mounting Type	Surface Mount
Number Of Pins	3
Number of Channels	2
Number of Pins	3
Part Number	KISLOC
Smart Home Compatibility	Not Smart Home Compatible
UPC	713034088806 713034065166
Unit Count	1.0 Count

Kicker KISLOC 2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter, Black

Details

Details

Description

Specifications

Reviews

Common Questions