Super Glue The Original 19061 Porcelain Repair

I’ve had a chip in my bathtub for years. I have tried every product I could find to fix it but they all end up flaking off after a few scrubs. This is the first product I’ve found that LASTS!Also bonus that it dries quickly and can get wet quickly after application.

My bathtub had spots where porcelain had worn off and the metal underneath had started to rust. I let it dry overnight and sanded around the worn out porcelain slightly. Then with a paint brush I applied a small quantity of this paste. The next morning I applied another coat. It has been more than 3 months now and this patch job has been holding great. There is no more rust on that spot. The color is very bright white so it's easy to spot in the off-white tub, but that's that's still one very cost effective fix.

Used a few times to help chip in tub. Good temp repair until a more permanent solution is found

After a couple of years of hard use we had managed to chip the white porcelin surface of our new ($800.00!) GE gas range in 3 or 4 places. I was able to fill these dings quite nicely with a liquid epoxy product from our local Ace Hardware outlet. But in a couple of weeks the spots, while still solidly in place, began to turn a yellowish off-white.Hoping against hope that paint technology might offer a way out I googled my chip problem and found this product claiming to be heat-resistant offered by Amazon. About six weeks ago I covered the yellowed spots on our range with a thin coat of the Super Glue paint.So far, so good. The spots are still pure white even though a couple are on the edge of the burner well. Since the biggest dings were on the front and side edges of the stove's surface I'm pretty confidant that they will stay that way - though I'm hoping those that are much closer to the burner flames will stay white. Since I still have 99% of the paint left in the tube I'm hopeful I won't need it.I wouldn't expect a miracle with the heat-resistant Super Glue paint alone. The Ace brand epoxy I put on in the first place was very tough and a couple of coats filled (with careful sanding) the crater in the porcelin surface of quite nicely. The epoxy seemed to fill the cavity and the Super Glue provided a white surface.I'll try to report back if and when the Super Glue treatment turns sour. Otherwise, will try to do so in six months.

Came with a leak and was very thin and runny

Great all purpose glue priced right.

I scraped a cast iron tub when I was replacing my toilet. It was two tiny scratches and I didn’t see the need for a whole big kit to repair. While this does disguise the black scratches, it’s much too bright white and still sticks out. Also didn’t “level” as much as I’d like. I used a tiny paint brush to apply, but I think some kind of dense sponge to lightly apply a couple coats would have turned out nicer.

The only warning is, do not expect perfect, smooth, seamless. But, if you are concerned about strength, durability, and lasting... man, this stuff is great. It definitely sticks and lasts on a good clean surface. I have used it on a sink, a tube, and even our washing machine to keep rust from spreading.