Testors Enamel Paint .25oz, Orange Fluorescent

The paint, though watery, does the job. I pained some fine metal parts and I was using a toothpick. I mixed the paint up well and, as I read in another review, it still appeared to be thin. I applied the paint and had no problem with its adhesion. Two coats on the surface of the metal worked well. The paint is a bright fluorescent orange and is highly visible in light. The watery thin viscosity allows you to apply it to very small items. I would recommend this item for painting small parts. I would also purchase again if needed.

This worked great on my plinker. The orange is much better than the red nail polish I tried to use first!

It is a little runny, so I left the bottle open for 2 days, came back and it's perfect. I used it on a 357 revolver and a 9 mm that had white dot sights, they are now orange and very easy to pick up

The paint dries a bright "hunter jacket" orange. However, it is flat and not glossy. This may work better for gun sights. It may be designed to be put over a white base coat. I didnt see any instructions online, but this was recommended with other gun site paints I have purchased. As others have mentioned, it is very thin and does not have the consistency of typical Testor's model paint. It may be mixed for an airbrush. I haven't tried this, but you may consider putting a small amount on a non-absorbent surface and letting some of the solvent evaporate before using it. You will need a very soft brush otherwise you will remove the first coat when applying a second coat. I would highly recommend mixing it thoroughly (toothpick) after shaking it. I am not sure how quickly the pigment may settle out, so remixing may be necessary.

Great hi-viz option for weapons’ sights! It really pops and is very visible. Not a night-sight replacement or equivalent, but very good in normal and low-light scenarios.

Fine for small projects Takes some shaking to get it ready to paint with.

Just a little too runny for what I needed it for,, but it works

Used it on my front sights on my ar15 & pistols, my eyes pick up the bright orange easily.

expensive, but could not find this color anywhere else

Perfect

I bought this paint to refurbish my vintage Yamaha XJ650 Maxim gauge cluster. It did what it should do. Masking face of the gauges. Use very fine artist paint brush with 3 coats of paint to the needles over 12 hours which gives another brilliant life to my gauges. Reason for 4 star is this tiny bottle is a bit expensive and content of it can help you to repaint similar gauge needle 50 times. It is still nice to get this item from Amazon.

way to bright and what a waste of shipping expense.look at the box it came in .